Search: Posts Made By: HOOKUPS-PRO-CRX
Showing results 1 to 25 of 113
Search took 1.00 seconds.
Forum: Tech / Misc
01-04-2003, 01:51 AM
Replies: 13
Views: 1,324
Posted By HOOKUPS-PRO-CRX

Re: Steering Wheel Alighment after installation? (madslackin)

just drive the car straight and then stop and change the wheel you should be fine. aligning the front wheels will not work.
Forum: Tech / Misc
01-04-2003, 01:49 AM
Forum: Tech / Misc
01-04-2003, 01:46 AM
Replies: 16
Views: 753
Posted By HOOKUPS-PRO-CRX

Re: Cam Seals Tech. (92tealvx)

the 12mm cam cap bolts are 16ft lbs and the 10mm cam cap bolts are 7.2lbs.
Forum: Tech / Misc
01-04-2003, 01:43 AM
Replies: 11
Views: 1,926
Posted By HOOKUPS-PRO-CRX

Re: advanced timing killing top end? (milanoGSR)

best wire ULTra 8 jdm wires. they come on 99 spec type-r
Forum: Tech / Misc
01-04-2003, 01:39 AM
Replies: 5
Views: 368
Posted By HOOKUPS-PRO-CRX

Re: Help with wiring CTR headlights. (I can't believe this shit)

do not add a swithc that is wrong. all you need to do is get a test light and find the wire on the corner light that is hot when the parking lights are on. one wire from the city light goes to that...
Forum: Tech / Misc
01-02-2003, 11:17 PM
Replies: 15
Views: 536
Posted By HOOKUPS-PRO-CRX

Re: SOHC experiment! (T-sohctec)

IMO single cam zc motor (budget) mill head 65thous. home made intake, hollow cat,
(you said budget screamer right?)lol
Forum: Tech / Misc
01-02-2003, 11:12 PM
Replies: 7
Views: 714
Posted By HOOKUPS-PRO-CRX

Re: Power gains (lazy bum shaughn)

engine swap https://honda-tech.com/forums/images/smilies/emthup.gif
Forum: Tech / Misc
01-02-2003, 11:11 PM
Replies: 8
Views: 387
Posted By HOOKUPS-PRO-CRX

Re: engine swap? (Nameless)

i would vote either b20 auto (mass torque) or b20 vtec auto. i have done both in 92-95 civics and they are very surprising for an auto.
Forum: Tech / Misc
01-02-2003, 11:08 PM
Replies: 11
Views: 1,926
Posted By HOOKUPS-PRO-CRX

Re: advanced timing killing top end? (tzsir)

advancing ignition timing does not hurt a motor unless the compression ratio is too high and or the octane of gas is too low. by advancing you distributor you will gain low end response but the motor...
Forum: Tech / Misc
01-02-2003, 11:03 PM
Replies: 5
Views: 664
Posted By HOOKUPS-PRO-CRX

Re: p28, p30 - same, differences?? (Kataku2K3)

the P28 ecu is your best bet no knock sensor and multitudes of programs out there for them.stick with P28 https://honda-tech.com/forums/images/smilies/emthup.gif
12-30-2002, 08:07 AM
Replies: 3
Views: 368
Posted By HOOKUPS-PRO-CRX

Re: Camshaft Opinions............ (Beave0101)

i have never dealt with TODA A's but TODA B's are awsome. i will get you a price today also some HP #'s ...
12-30-2002, 08:05 AM
Replies: 33
Views: 1,252
Posted By HOOKUPS-PRO-CRX

Re: Oh Snap ..........I just blew my engine (TheHater)

just some advice that you probably already know. (i used to work at a dealership) they are going to do everything possible to get out of replacing your motor ree. JUST ACT STUPID!!! dont let them...
12-30-2002, 07:52 AM
Replies: 4
Views: 352
Posted By HOOKUPS-PRO-CRX

Re: 92-95 hatch with SWAPPED FRONT ENDS (12SecHatch)

sorry i dont have a pic but i have a friend that has a 92 hb with a 95 teg front end. i know that the core support bolted up as well as the hood but the fenders were about 3" off between the doors...
12-29-2002, 10:42 AM
Replies: 10
Views: 587
Posted By HOOKUPS-PRO-CRX

Re: Where to get my engine? (JV)

EVER HEARD OF A SEARCH??? shut up and answer the questions or dont bother who the F*** are you? nobody get off your high horse.i dont mean to be rude but peeps ask questions to get answers and if...
12-29-2002, 10:33 AM
Replies: 14
Views: 1,516
Posted By HOOKUPS-PRO-CRX

Re: Help!!Choosing Engine.. B18B Vs. B16a1 (Toda Party)

if you say you have 2.5k to spend then you can get a SIR2 b16a 170hp full conversion . that would be your best bet. IMO
12-29-2002, 10:30 AM
Replies: 4
Views: 487
Posted By HOOKUPS-PRO-CRX

Re: h22 in a crx....??? (EGsex)

very bad idea. i own a 90 hb with an h22 its fast as hell in a staight line but other than that i regret doing it. we did it at my shop like 2 years ago and the car sits now. fast as hell but not fun...
12-29-2002, 10:27 AM
Replies: 9
Views: 579
Posted By HOOKUPS-PRO-CRX

Re: 93 Civic CX with 2000 SIR B16A2 engine wiring help (Tristan)

no the b16 does not have secondary butterflies. also if you do not wish to track down a integra harness you can always use your stock cx harness it will plug into everything except vtec oil pressure...
12-29-2002, 10:23 AM
Replies: 18
Views: 1,446
Posted By HOOKUPS-PRO-CRX

Re: would this ecu work for my set up? ls/vtec (AzN_Flava)

chipping the ecu requires a chip burrner and the chip beds ect. costly setup so just purchase a p28 with a mugen spoon or other programm and be done with it.
12-29-2002, 10:13 AM
Replies: 7
Views: 525
Posted By HOOKUPS-PRO-CRX

Re: Zc turbo Vs. B16 + simple bolt-ons (sdadlani)

for a basic b16 swap in an 88-91 chassis you are looking at 1900.00-2300.00 depending on model. this is due to different wiring harnesses front hubs might need to be changed (hf or 4 speed) ect. if...
12-29-2002, 10:09 AM
Replies: 2
Views: 373
Posted By HOOKUPS-PRO-CRX

Re: b18c5 into 92 si (grumpy92si)

ok here goes, your 92 si is perfect for this swap. the motor will bolt in with absolutely no modifications. you will use your existing si wiring harness and in my opinion i would use your stock p28...
12-29-2002, 09:51 AM
Replies: 12
Views: 623
Posted By HOOKUPS-PRO-CRX

Re: ~Injectors & B20/vtecs... some info & I would like some info~ (Jeff C)

rc 310cc injectors are very nice for almost every street setup depending on comp ratio of course. they are no to expensive and are readilly available. if you are running an obd0 ecu on your crx then...
12-29-2002, 09:43 AM
Replies: 112
Views: 4,717
Posted By HOOKUPS-PRO-CRX

Re: jdm h22 vs jdm b18c5 (MikeRotch)

ok no body has adressed the transmission issues between the two. i like both swaps and i have performed both swaps. the complaint i get the most often is about the trans. the H22 trans is of course...
12-29-2002, 09:34 AM
Replies: 8
Views: 3,215
Posted By HOOKUPS-PRO-CRX

Re: B16a head on a gsr block???????? (SIXTYdashONE)

in my opinion a b16 head on a gsr block is a good combo. you will loose .2 comp however stock to stock the b16 head flows a bit better than the gsr head. what you will have is a kinda low comp type-r...
12-28-2002, 01:42 AM
Replies: 11
Views: 518
Posted By HOOKUPS-PRO-CRX

Re: Motor swap in a 95 cx???? (daxxbomb)

if you are going to spend the $$$ for an f22 turbo my suggestion is to take that $$$ and swap a j-spec ITR motor . would be faster and handle better
Showing results 1 to 25 of 113
 


 
Forum Jump


All times are GMT -8. The time now is 06:22 AM.