B SERIES PARTS FOR SALE IN NJ
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: Dirty Jersey, USA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
B SERIES PARTS FOR SALE IN NJ
B SERIES PARTS FOR SALE
--------------------------------------------------------------------------------
Have complete, but disassembled GSR for sale.
motor spun a rod bearing, will need crank and one rod to be safe.
Had 7k on motor when bearing spun. had all new parts/seals installed when
motor was built. Will part out or sell complete.
MAKE OFFER ON ALL PARTS..NO RESONABLE OFFERS REFUSED!!
Block is bored .025 over, has ARP head studs (could use a good hone)
CTR pistons stock rods (7k miles)
GSR Head has stock valves, 3angle valve job, rocket valvetrain, milled .007
skunk2 stage 2 cams (7k miles)
SRR cam gears (7k miles)
skunk2 IM w/ LS TB, type r throttle cable and bracket (for gsr) SOLD
RC 310 injectors SOLD
B&M fuel pressure guage, AEM FPR (silver) (7k miles)
SMSP Header with 2.5in collector SOLD
2.5 headerback exhaust for civic hatch, can only be used with SMSP header
w.out being modded. HKS hipower muffler, all once piece, under axle design
exhaust made 25whp over smaller exhaust/dc header (tuned) 15whp (with previous tune)
Shaved Valve cover painted dark gunmetal (cut for adjusting cam gears)
B16 trans no grinds
ACT lightened flywheel
P91 ECU, same as P28...tuned by Jeff Evans with neptune. motor made 205whp/141tq. http://forums.evans-tuning.com...=2340
have Bseries shiftlinkage with skunk2 short shifter and weighted ****
also have VAFC2, 96-98 GSR ECU, AutoMeter AIR FUEL guage,
DC sports 4-1 header (b series).
also have 2 15x7 Kosei K1's in silver with 205/50r15 BFG drags
Rims are MINT. Tires have plenty of life left...
MAKE OFFERS ON ALL PARTS...RESONABLE OFFERS NOT REFUSED!!
LOWBALLERS DONT WASTE MY TIME
EMAIL IS KEY---Grimace.ej6@gmail.com
Modified by Grimace EJ6 at 1:07 AM 8/21/2005
--------------------------------------------------------------------------------
Have complete, but disassembled GSR for sale.
motor spun a rod bearing, will need crank and one rod to be safe.
Had 7k on motor when bearing spun. had all new parts/seals installed when
motor was built. Will part out or sell complete.
MAKE OFFER ON ALL PARTS..NO RESONABLE OFFERS REFUSED!!
Block is bored .025 over, has ARP head studs (could use a good hone)
CTR pistons stock rods (7k miles)
GSR Head has stock valves, 3angle valve job, rocket valvetrain, milled .007
skunk2 stage 2 cams (7k miles)
SRR cam gears (7k miles)
skunk2 IM w/ LS TB, type r throttle cable and bracket (for gsr) SOLD
RC 310 injectors SOLD
B&M fuel pressure guage, AEM FPR (silver) (7k miles)
SMSP Header with 2.5in collector SOLD
2.5 headerback exhaust for civic hatch, can only be used with SMSP header
w.out being modded. HKS hipower muffler, all once piece, under axle design
exhaust made 25whp over smaller exhaust/dc header (tuned) 15whp (with previous tune)
Shaved Valve cover painted dark gunmetal (cut for adjusting cam gears)
B16 trans no grinds
ACT lightened flywheel
P91 ECU, same as P28...tuned by Jeff Evans with neptune. motor made 205whp/141tq. http://forums.evans-tuning.com...=2340
have Bseries shiftlinkage with skunk2 short shifter and weighted ****
also have VAFC2, 96-98 GSR ECU, AutoMeter AIR FUEL guage,
DC sports 4-1 header (b series).
also have 2 15x7 Kosei K1's in silver with 205/50r15 BFG drags
Rims are MINT. Tires have plenty of life left...
MAKE OFFERS ON ALL PARTS...RESONABLE OFFERS NOT REFUSED!!
LOWBALLERS DONT WASTE MY TIME
EMAIL IS KEY---Grimace.ej6@gmail.com
Modified by Grimace EJ6 at 1:07 AM 8/21/2005
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post