Race Fab/Roll cages
#27
Honda-Tech Member
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
#28
Honda-Tech Member
Join Date: Oct 2004
Location: Tempe, AZ
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
ARIZONA
Lone Star Racing
Primary focus is ATV/UTV suspension, chassis, and billet parts, but has build many SFI legal cages including Ryan Woons WOTM 1400hp Supra
offer 4130 or DOM
744 W. Crescent Ave
Mesa, AZ 85210
Lone Star Racing
Primary focus is ATV/UTV suspension, chassis, and billet parts, but has build many SFI legal cages including Ryan Woons WOTM 1400hp Supra
offer 4130 or DOM
744 W. Crescent Ave
Mesa, AZ 85210
#29
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
FABRICATION REQUIRED TRANSPORT
Fabrication of cages for desert and rock crawlers
24 hoursof lemons cages also built 10 of those
located in Oakley Ca.
Also specialize in transportation of cars,trucks,motorcycles,limos and hot tubs .
925-382-1058
8am-7pm
Fabrication of cages for desert and rock crawlers
24 hoursof lemons cages also built 10 of those
located in Oakley Ca.
Also specialize in transportation of cars,trucks,motorcycles,limos and hot tubs .
925-382-1058
8am-7pm
#31
Honda-Tech Member
Re: Race Fab/Roll cages
I do not like those cage designs
#32
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
Those images are from www.24hoursoflemons.com racecars in which 2 cars were rolled and guys walked away 80 MPH rollovers. And the doors bars have got hit doors by other cars and no one hurt.
Sorry don't you like cage design they are proven.
Sorry don't you like cage design they are proven.
#33
Honda-Tech Member
Re: Race Fab/Roll cages
Those images are from www.24hoursoflemons.com racecars in which 2 cars were rolled and guys walked away 80 MPH rollovers. And the doors bars have got hit doors by other cars and no one hurt.
Sorry don't you like cage design they are proven.
Sorry don't you like cage design they are proven.
#34
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
What does that supposed to mean?
Have You raced a Lemons race or a chumpcar ?
Do You roadrace?
There is few races on south Carolina.
If not then you should.
My cage designs are different but proven non the less. Especially when Your putting cages in. Cars that were never meant for a cage/racing. Like 73 pinto station wagons, cavalier wagons, maximas, Cadillac sts with hand controls and Honda wagovans. You can't call autopower for those cages.
Have You raced a Lemons race or a chumpcar ?
Do You roadrace?
There is few races on south Carolina.
If not then you should.
My cage designs are different but proven non the less. Especially when Your putting cages in. Cars that were never meant for a cage/racing. Like 73 pinto station wagons, cavalier wagons, maximas, Cadillac sts with hand controls and Honda wagovans. You can't call autopower for those cages.
#35
Honda-Tech Member
Re: Race Fab/Roll cages
What does that supposed to mean?
Have You raced a Lemons race or a chumpcar ?
Do You roadrace?
There is few races on south Carolina.
If not then you should.
My cage designs are different but proven non the less. Especially when Your putting cages in. Cars that were never meant for a cage/racing. Like 73 pinto station wagons, cavalier wagons, maximas, Cadillac sts with hand controls and Honda wagovans. You can't call autopower for those cages.
Have You raced a Lemons race or a chumpcar ?
Do You roadrace?
There is few races on south Carolina.
If not then you should.
My cage designs are different but proven non the less. Especially when Your putting cages in. Cars that were never meant for a cage/racing. Like 73 pinto station wagons, cavalier wagons, maximas, Cadillac sts with hand controls and Honda wagovans. You can't call autopower for those cages.
#37
Re: Race Fab/Roll cages
when someone builds a cage on my next race, there will be NO negatives about the design/construction.
Roll cages are cheap, hospital stays are not
#38
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
These are safe cages everything I build Is 1 3/4-.120 DOM. Constructive criticism is OK. And is hard to take but I've built cages for when you roll not if You roll. My design are different not the usually coolie cutter stuff. Ill find link on YouTube on cage I built tested.
This thread is getting big time hijacked.
This thread is getting big time hijacked.
#39
Honda-Tech Member
Re: Race Fab/Roll cages
These are safe cages everything I build Is 1 3/4-.120 DOM. Constructive criticism is OK. And is hard to take but I've built cages for when you roll not if You roll. My design are different not the usually coolie cutter stuff. Ill find link on YouTube on cage I built tested.
This thread is getting big time hijacked.
This thread is getting big time hijacked.
#40
Honda-Tech Member
Re: Race Fab/Roll cages
From an engineering standpoint, there are numerous flaws with your design. A tube is weakest in the middle going perpendicular to the length but you have a door bar terminating there with no reinforcement? Numerous unnecessary bends? The cages might of held up but it could be a much stronger design for the amount of material present.
#41
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
A bunch of those door bars weren't finish ,But I understand what your saying .I build a lot of desert with all sorts of triangleation ( if that is a word) .So the road race is a lot different . Everyone has different ways of doing things and these have worked for me in the past .
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
#42
Honda-Tech Member
Re: Race Fab/Roll cages
A bunch of those door bars weren't finish ,But I understand what your saying .I build a lot of desert with all sorts of triangulation ( if that is a word) .So the road race is a lot different . Everyone has different ways of doing things and these have worked for me in the past .
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
I also watch the video and your cage did hold up well.
#43
Re: Race Fab/Roll cages
Your cage did great , thanks for the video. How interesting that the only time he could have got injured was when he dropped on his head, i'm going have to remember to put one hand up. Your welds look fine as well it's a mig, too many people spend time on this site looking at tig welds I suppose.
You might want to look into some cage designs , like WRC http://www.google.com/images?hl=en&q...w=1280&bih=832 or speed world challenge, maybe visit a race as you can take your work and make it a lot lighter and stronger at the same time. You obviously have the skills so no reason you can't change up the designs too.
Good stuff fabtoys
You might want to look into some cage designs , like WRC http://www.google.com/images?hl=en&q...w=1280&bih=832 or speed world challenge, maybe visit a race as you can take your work and make it a lot lighter and stronger at the same time. You obviously have the skills so no reason you can't change up the designs too.
Good stuff fabtoys
#44
Honda-Tech Member
Join Date: Mar 2004
Location: ORANGE COUNTY, CA., USA
Posts: 1,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
A bunch of those door bars weren't finish ,But I understand what your saying .I build a lot of desert with all sorts of triangleation ( if that is a word) .So the road race is a lot different . Everyone has different ways of doing things and these have worked for me in the past .
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
here is a link to the my cage tested
http://www.youtube.com/watch?v=e2QTj...eature=related
Drewbie you never answered my questions
Nice one....
Im not one to comment much especially on anyone else's fab work (ever) but you backed it up like no other. Not many fabricators have been lucky enough to have video proof of their hard work to be proven (unfortunately at anothers expense) but you got it and you cant deny that you did a good job. You seam to like to do some elaborate tube work, you can simplify it and make your cages even stronger at the same time with a more "proper" design. Like i said i don't ever comment or talk to "fabricators" usually about their work but if you would ever want (if needed of course) i can make myself available to help you out on simplifying your cages to not only make them even safer (i know yours work already ;-) ) but also help make the job a little bit easier to execute.
-Louie
#46
#47
Honda-Tech Member
Join Date: Aug 2007
Location: discovery bay, ca, usa
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
Nice one....
Im not one to comment much especially on anyone else's fab work (ever) but you backed it up like no other. Not many fabricators have been lucky enough to have video proof of their hard work to be proven (unfortunately at anothers expense) but you got it and you cant deny that you did a good job. You seam to like to do some elaborate tube work, you can simplify it and make your cages even stronger at the same time with a more "proper" design. Like i said i don't ever comment or talk to "fabricators" usually about their work but if you would ever want (if needed of course) i can make myself available to help you out on simplifying your cages to not only make them even safer (i know yours work already ;-) ) but also help make the job a little bit easier to execute.
-Louie
Im not one to comment much especially on anyone else's fab work (ever) but you backed it up like no other. Not many fabricators have been lucky enough to have video proof of their hard work to be proven (unfortunately at anothers expense) but you got it and you cant deny that you did a good job. You seam to like to do some elaborate tube work, you can simplify it and make your cages even stronger at the same time with a more "proper" design. Like i said i don't ever comment or talk to "fabricators" usually about their work but if you would ever want (if needed of course) i can make myself available to help you out on simplifying your cages to not only make them even safer (i know yours work already ;-) ) but also help make the job a little bit easier to execute.
-Louie
#48
Honda-Tech Member
Re: Race Fab/Roll cages
Southeast (Florida): Creative Motion Concepts http://cmcpros.com/new/default.asp
Built our chump cage, decent prices, but research rulebooks to make the cage legal for multiple sanctioning bodies, seat mounted to the cage (not the car), etc. Haven't tested the cage yet, and hope not to, but not worried about it failing.
Built our chump cage, decent prices, but research rulebooks to make the cage legal for multiple sanctioning bodies, seat mounted to the cage (not the car), etc. Haven't tested the cage yet, and hope not to, but not worried about it failing.
#49
H-T Basic Sponsor
Join Date: Jul 2010
Location: ChiTown
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
Midwest
www.TOUGEFACTORY.com
www.TF-WORKS.com
TougeFactory / TF Works **we have two locations**
1201 Busse Rd
Elk Grove Village, IL 60007
847-290-1531
S14 NASA Wheel to Wheel Spec Rollcage **still unfinished haha**
GT Wing Stands to Chassis
www.TOUGEFACTORY.com
www.TF-WORKS.com
TougeFactory / TF Works **we have two locations**
1201 Busse Rd
Elk Grove Village, IL 60007
847-290-1531
S14 NASA Wheel to Wheel Spec Rollcage **still unfinished haha**
GT Wing Stands to Chassis
#50
Honda-Tech Member
Join Date: Dec 2003
Location: Where the beer flows like wine, CO, USA
Posts: 4,114
Likes: 0
Received 0 Likes
on
0 Posts
Re: Race Fab/Roll cages
Northern Colorado:
52Eighty Performance & Fabrication (970) 402-3853
Facebook - 52Eighty Performance & Fabrication
http://www.facebook.com/home.php#!/p...20336171352141
Roll Bars, Cages, SCCA, NASA, NHRA, Time Attack etc.
Turbo and Performance Fabrication
Tube Bending, MIG, TIG, Plasma Cutting etc.
52Eighty Performance & Fabrication (970) 402-3853
Facebook - 52Eighty Performance & Fabrication
http://www.facebook.com/home.php#!/p...20336171352141
Roll Bars, Cages, SCCA, NASA, NHRA, Time Attack etc.
Turbo and Performance Fabrication
Tube Bending, MIG, TIG, Plasma Cutting etc.