ppg tech data
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2006
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
ppg tech data
i should be shooting some parts today and i dont have the flash times for anything, the ppg site sucks *****, and google isn't helping me much. i'll be going in the order of omni 172 reduced epoxy>deltron dbu 5642 base>shopline jc630 clear. anybody have a clue as to flash times, or a sort of "rule of thumb." if i don't get this done today i'll have to wait another week before i have time to get to it
#2
Re: ppg tech data (burnitdown)
Reduced epoxy I'd let flash for 30 minutes before shooting base on it. DBU let flash for 10 minutes between coats and 30 minutes before shooting clear over. Omni clear I let flash for 20 minutes inbetween coats for MC161 (high solids), everything else I flash for 15 minutes between med-wet coats.
Hope this helps.
Hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post