DPFI OBD0 to OBD1 harnesses
10-12-2005, 08:59 AM
#1
Member
Thread Starter
Join Date: Nov 2000
Location: www.boomslang.us
Posts: 1,829
Likes: 0
Received 0 Likes
on
0 Posts
DPFI OBD0 to OBD1 harnesses
We would like to reintroduce our DPFI OBD0 to OBD1 harnesses. This harness greatly simplifies the conversion of DPFI vehicles to use an OBD1 ecu with MPFI engine.
The idea is simple. Use our harness in conjuction with your DPFI engine harness.
There is no need to ship your DPFI engine harness off and pay someone $500 to cut it up.
There are only a couple minor modifications that need to be made to your DPFI harness. These modifications are covered in depth in our installation instructions.
You can download them here:
http://www.boomslang.us/obd0_1.pdf
This harness only has four extra wires than the standard MPFI OBD0 to OBD1 conversion harness.
Two wires are for the two added injectors to convert to MPFI. The other two wires are for the crankshaft position sensor.
Please see our site for pricing. Thanks for looking!
The idea is simple. Use our harness in conjuction with your DPFI engine harness.
There is no need to ship your DPFI engine harness off and pay someone $500 to cut it up.
There are only a couple minor modifications that need to be made to your DPFI harness. These modifications are covered in depth in our installation instructions.
You can download them here:
http://www.boomslang.us/obd0_1.pdf
This harness only has four extra wires than the standard MPFI OBD0 to OBD1 conversion harness.
Two wires are for the two added injectors to convert to MPFI. The other two wires are for the crankshaft position sensor.
Please see our site for pricing. Thanks for looking!
Thread
Thread Starter
Forum
Replies
Last Post
bobbyisking
Acura Integra
3
07-07-2008 09:22 AM
