carbonall

Composites Fab Custom Carbon Fiber Products. As of right now we have mostly carbon fiber and kevlar interior products. We are coming out with exterior and race products very soon. We know these have no weight reduction and are for cosmetic purposes only. The hoods we are coming out with will be very light and strong. Everything we do is vacuum infused. This means everything in the mold goes in dry and then it is put under huge vacuum pressure. Then the resins are injected into the piece so you get a air-free light product. Check out our website at http://www.compositesfab.com

Here is a pic of a hood frame under infusion



Here are some products we stock

Flat Sheets


They can be used for just about anything


94-01 Integra Door Inserts


92-95 civic power windows kevlar door inserts



96-00 Civic power windows carbon door inserts


92-00 Civic Fuel Pump


96-00 Civic non-power windows carbon door inserts


94-01 Integra rear cargo covers
Pictured is and orange, normal carbon, and red




96-00 civic power door inserts - Kevlar


All Composites Fab Products are now availible in the 1x1 plain weave. This is the same weave that Mugen and Spoon Sports uses on their carbon products. Perfectly matches all your JDM parts






Here are some pics of our hoods we are doing. Again remeber these are 100% vacuum infused. Pictured is a hood for the new dodge charger. It is about and and a half integra hoods for comparison and it only weights 8lbs. Our hoods will start coming out at the beginning of the next year. They will be carbon fiber skin and frames. They will be $595 but will be lighter and stronger then ANY street hood. UV protected and made with epoxy based resins. Full rolled edges as well. All latches secured with 100% dupont kevlar. Only hood that does not require hood pins.





Here is some new stuff. Full Kelvar racing hoods for I-Motoracing.com and Roger foo.









Modified by carbonall at 7:21 AM 5/9/2006

Alexander

CompositesFAB =

carbonall

92-95 Civic cargo cover


Be on the look out for 1pc cargo covers

92-95 Civic non-power windows door inserts-carbon


92-95 Civic coupe rear door panel inserts - Carbon





Modified by carbonall at 10:17 AM 12/8/2005

Rory Breaker

I have some CompositeFab products, cant say enough about the craftsmanship. Also very responsive, and very professional, this isnt a bunch of kids whos friends uncles cousin makes some CF products in their spare time.

Great stuff...cant wait to replace my VIS hood with a CompFab hood!

carbonall

We also carry everything we make in fiberglass using the same vacuum infusion methods to insure highquality light fiberglass parts

96-00 Civic Power Windows Fiberglass Door Inserts


96-00 Civic Cargo Cover


90-93 Integra Cargo Cover


Thanks for the props guys!


Modified by carbonall at 10:19 AM 12/8/2005

jwood122

u got pm

.Jay

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by carbonall &raquo;</TD></TR><TR><TD CLASS="quote">90-93 Integra Cargo Cover


Thanks for the props guys!</TD></TR></TABLE>

Weight specs?

Bluewind

Post more pictures of the hoods. Your process is very appealing!

carbonall

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Jay &raquo;</TD></TR><TR><TD CLASS="quote">

Weight specs?</TD></TR></TABLE>

they are about the same as a stock cover, maybe a half a pound less. They are made for cosmetic purposes. If someone wanted to lose the weight they would just take it out We can make them pretty light if you wanted and we also have them coming out in a 1pc. I will post more pics of the hoods when I can some taken. Our production hoods are still in the prototyping phase so they will be released soon!

carbonall

Also we are starting our line of carbon fiber and fiberglass lips. Our first ones we made were for the old school datsun 510's and our next batch will be our own design and we are also making a replica backyard bumper that will have a removable carbon or kevlar lip.

Here is a pic of the datsun lip just for illustration



96-00 Civic Coupe Sunroof Cover

broketuner-Sol_Si

How much do your EG hatch parts run(either CF or kevlar)? Cargo Cover, side panels (rear), Door panels (no power) & hood (when it's available). Also are you going to make a CF or Kevlar hatch?

carbonall

PM Sent

CDtegGo

I have a integra carbon cover made by Composites Fab. Im a very hard to impress person and Composites Fab has done just that! I have seen a lot of carbon fiber products. The quality of these products are FAR above average! The weave is perfect, the finish is incredible, and the fitment is great! Very Recommended!!

carbonall

that's right Glad you like your cargo cover! So when are you getting the inserts hahah.

Mr.OB*GYN_Rhett

iTrader: (2)

awesome products, kevlar **** is dope

jwood122

more kevlar!!!!

no2unenolife

if you guys made the si-vtec lip in carbon or in kevlar i'd buy it in a heart beat!

betsuni

wow! very nice products....

carbonall

This will give you an better idea of kevlar colors we can do.

Orange Integra cargo cover




Blue Integra Cargo Cover


This cargo cover is for the eclipse but it shows what the red looks like


We also have silver, all blue, all red, and all black texilium


Here is a pic of an integra cargo cover under infusion. You can see that everything in the mold is put dry and in the picture the resin is being injected into the pieces


Here is Jason, one of our employees. He is a Kevlar E-thug




Modified by carbonall at 9:33 AM 12/12/2005

carbonall

Thanks guys for the props on the products. Everyone that had questions I IM'ed yeah back. Also thanks to you who have ordered products!

igo4bmx

wow
im impressed!!!

what about front lips?

carbonall

we will be coming out with lips soon, but we are not a huge manufacture. Where we can come out with a ton of applications in the matter of days. Most our days are filled with filling orders and does not leave much time for added applications. But we will come out with several lips but the styles and applications are all still up in the air

Damon B.

can't wait for the hoods to come out

carbonall

we are working as fast as we can with the hoods now the 99-00 civic coupe and 94-01 Inetgra will be the first ones we will do. Also all our molds are lined with several layers of carbon fiber on the rear to help with strength and longevity of the molds. This helps insure a very well fitting product. Pictured below is the DC fuel pump covers mold we just laid this morning. You can see the layers of carbon we backed the mold with

killakoreann

Hello there.
Can i get a price on the DC-2 Rear Hatch Lid?
Thanks.