Reverse Lights not working
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Reverse Lights not working
Have a 98 Prelude.
I've confirmed that the bulbs are good. The cable is plugged into the transmission, all other connectors are good, and the fuse is good. All other lights work properly.
I've had the engine/tranny pulled since they last worked and the battery relocated to the trunk. Where exactly should I start tracing wires or something to get these bitches working again?
I've confirmed that the bulbs are good. The cable is plugged into the transmission, all other connectors are good, and the fuse is good. All other lights work properly.
I've had the engine/tranny pulled since they last worked and the battery relocated to the trunk. Where exactly should I start tracing wires or something to get these bitches working again?
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Reverse Lights not working
I read somewhere on here that besides that, certain changes with the wiring harness can **** it up. After engine work, I put in a P28 with S300 and the only other thing was a OBD2A->OBD1 conversion harness. I don't see how that'd affect it but I hate dealing with electronics... That shouldn't affect it should it? The car has always been 5 spd.
Thread
Thread Starter
Forum
Replies
Last Post
Canadian_EF
Honda CRX / EF Civic (1988 - 1991)
17
01-09-2017 06:02 PM