JDM TYPE R O2 SENSOR QUESTION
09-03-2009, 10:35 PM
#1
Thread Starter
Join Date: Jan 2008
Location: pa, usa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
JDM TYPE R O2 SENSOR QUESTION
i have a 1993 honda delsol with a jdm type r swap, i got the motor from a buddy that had it in a 92 hatchback, also ran it with no o2 sensor? hmmm..
im not sure if that was good or not but i need to know if i need to run it in mine or not & also what color the wire is or wires that goes to it because im not really sure, also, i keep hearing about secondary o2 sensor on this motor, do i have to run two o2 sensors?? please help
one more question... what color is the wire for the oil pressure sending unit?
thanks guys!!
im not sure if that was good or not but i need to know if i need to run it in mine or not & also what color the wire is or wires that goes to it because im not really sure, also, i keep hearing about secondary o2 sensor on this motor, do i have to run two o2 sensors?? please help
one more question... what color is the wire for the oil pressure sending unit?
thanks guys!!
09-04-2009, 05:12 AM
#2
Function > Form
Re: JDM TYPE R O2 SENSOR QUESTION
By Type-R motor I am assuming it's a DC5 R motor and not a B18C/5, correct? Just to make sure lol. Anyway, do you have K-Pro?
Also, the K Motor thread is going to be more help for you because you don't have either a DC5 or an EP3.
Also, the K Motor thread is going to be more help for you because you don't have either a DC5 or an EP3.
Last edited by josh's ep3; 09-04-2009 at 05:26 AM.
09-04-2009, 08:33 AM
#3
Honda-Tech Member
Join Date: Aug 2008
Location: Baton Rouge, LA, USA
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM TYPE R O2 SENSOR QUESTION
What engine do you have? B or K?
If you have a K, and you are using the stock Type R ECU then you will need both O2 sensors to make the car run correctly. If you have a KPRO, then disable the secondary o2.
The Primary wideband o2 sensor has 1 Green(or blue if it is a replacement), 1 white and 2 black wires.
The secondary sensor has 1 gray, 1 white and 2 black wires.
What conversion harness do you have?
If you have a K, and you are using the stock Type R ECU then you will need both O2 sensors to make the car run correctly. If you have a KPRO, then disable the secondary o2.
The Primary wideband o2 sensor has 1 Green(or blue if it is a replacement), 1 white and 2 black wires.
The secondary sensor has 1 gray, 1 white and 2 black wires.
What conversion harness do you have?
Thread
Thread Starter
Forum
Replies
Last Post
1993eghatch
Honda Civic / Del Sol (1992 - 2000)
8
09-24-2010 05:52 PM
