ef9 Si k20z3 starting issue
#1
Honda-Tech Member
Thread Starter
iTrader: (2)
Join Date: Apr 2008
Location: Los Angeles, Mexico
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
ef9 Si k20z3 starting issue
Car is still under construction, but had the motor running before this started.
To the swap. Its a 2009 z3 with 39k in a 90 Si using HR conversion harness and prb kpro.
From the beginning I had issues with the conversion harness and main relay. Then it was the problem of not being able to go above 20psi. When I finally got that fixed and had the motor running, I went ahead And shut it off. After that, never started again.
Checked all my fuses and all was good, realized I had no power coming from my ignition. So I switched out the ignition harness and was getting crank again, but wouldn't turn over.Realized later that I had no power out of fuse number 2(starter relay.) Fuse is good though(no power with multi meter though.) Switched it for another fuse and still no power with the ignition ON.
Luckily for me, I have my CRX. I switched the whole fuse box, ignition and ignition harness and have the same problem.*When I remove the fuse and put the multi meter in the nunber 2 slot, I get .60v, but as soon as I install a fuse, I get no voltage.
Four days on this **** and im just giving up. Hope you guys could help me.*Ask me any question and I could tell you what I've done and havent done.
Any help we be appreciated
Thanks
To the swap. Its a 2009 z3 with 39k in a 90 Si using HR conversion harness and prb kpro.
From the beginning I had issues with the conversion harness and main relay. Then it was the problem of not being able to go above 20psi. When I finally got that fixed and had the motor running, I went ahead And shut it off. After that, never started again.
Checked all my fuses and all was good, realized I had no power coming from my ignition. So I switched out the ignition harness and was getting crank again, but wouldn't turn over.Realized later that I had no power out of fuse number 2(starter relay.) Fuse is good though(no power with multi meter though.) Switched it for another fuse and still no power with the ignition ON.
Luckily for me, I have my CRX. I switched the whole fuse box, ignition and ignition harness and have the same problem.*When I remove the fuse and put the multi meter in the nunber 2 slot, I get .60v, but as soon as I install a fuse, I get no voltage.
Four days on this **** and im just giving up. Hope you guys could help me.*Ask me any question and I could tell you what I've done and havent done.
Any help we be appreciated
Thanks
Thread
Thread Starter
Forum
Replies
Last Post