be18see1

where is the knock sensor on a obd2 b18c1? i swapped my obd2 b18c1 into my 1993 DA. is the crank position sensor the same as the knock sensor? theres a sensor down by the crank pulley, but theres not sensor on the back on the block like my friends' b16s. note-i swapped my obd1 dizzy internals into the obd2 case.
edit-the car runs, but im pretty sure vtec doesnt engage, and when it revs it drops below 550 rpms and back up to 750.

pgpbubble

be18see1

its not there.

Honda Sport

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by be18see1 &raquo;</TD></TR><TR><TD CLASS="quote">its not there.</TD></TR></TABLE>

then put one there and wire it up. lol

dude_123

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by be18see1 &raquo;</TD></TR><TR><TD CLASS="quote">where is the knock sensor on a obd2 b18c1? i swapped my obd2 b18c1 into my 1993 DA. is the crank position sensor the same as the knock sensor? theres a sensor down by the crank pulley, but theres not sensor on the back on the block like my friends' b16s. note-i swapped my obd1 dizzy internals into the obd2 case.
edit-the car runs, but im pretty sure vtec doesnt engage, and when it revs it drops below 550 rpms and back up to 750.</TD></TR></TABLE>

Is there a hole where the ks supposed to be since the blocks that don't have ks doesn't even have the webbing to put the ks on.
The sensor by the crank pulley is the Crankshaft Speed Fluctuation (CKF) sensor. Crank position sensor is located in the dizzy.

be18see1

im going to sound like a complete moron. i found a green plug back there, but its already plugged into somthing. is this plug the sensor i want? and what could possibly be plugged into it? i assumed it was like an oil pressure sensor or something... god i sound stupid.

fenix4o9

http://rywire.com/store/faqdesk_info...6e410182f6c602

SpoonCivicSir20

are you sure its a b18c and not a b18b?

HondaPartsHero

the1337aaron

Is knock sensor 1 wire or 2 plug