renzema

how many ft/lbs do the valve cover bolts need on the h22a?

easy question I know but never found it on a search and can't find a haynes manual at any auto parts stores.

thanks
JR

vinuneuro

try a book store.

john d

get a helms it will be your best freind

blk97lude

LOl u guys need to chill.. just cause he doesnt have a helms doesnt mean we cant help.. thats why he posted right?

anyways.. i usually just hand tighten those just make sure they are tight and you should know if ur tighenting it down too much.. anyways ill try and find it in the helms and let u know

aderino4

I think all I did was screw it until you find resistance then add 1/4 turn to it and it should be allright.

If you tighten it too far it will snap....

SKDRCR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aderino4 &raquo;</TD></TR><TR><TD CLASS="quote">I think all I did was screw it until you find resistance then add 1/4 turn to it and it should be allright.

If you tighten it too far it will snap.... </TD></TR></TABLE>



edit: btw I think it's 7 inch pounds

tdo

iTrader: (1)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">



edit: btw I think it's 7 inch pounds</TD></TR></TABLE>

yup



people on H-T are too quick to be a dick. no one wants to help any more.

Saki

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tdo &raquo;</TD></TR><TR><TD CLASS="quote">
people on H-T are too quick to be a dick. no one wants to help any more.</TD></TR></TABLE>

i know, if you can't help don't post!

eMpAtHy

dont overtorque it. look at how the nuts are designed.

renzema

hey thanks for the help guys, ya I know I need a helms, been searching for one, but think I am just going to have to order one off of online, no bookstore, ect. has one. I have them for all my old cars but for some reason no one is caring the one I need.

once again thanks for the help.
JR

98TypeSH

usally most people dont even bother breaking out a tq wrench for those things. Just tighten till snug, no more or you will strip them and have to pull the valvecover and replace the stands. Look at how many bullshit posts it took for someone to answer this guys question. Its pretty ****** simple, just give him the answer and dont be a post *****. i saw someone say 7 inch lbs but in the helms diagram it does say 7 ft-lbs

prelittlelude

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SKDRCR &raquo;</TD></TR><TR><TD CLASS="quote">



edit: btw I think it's 7 inch pounds</TD></TR></TABLE>

bingo.. ive come so close to snaping those things so many times, be very gentle

renzema

the pic above says 7 ft/lbs, so just going to stick with that. Going to use the torque wrench, would hate to break one of them, such a head ache then.

Once again thanks for the help

SKDRCR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by renzema &raquo;</TD></TR><TR><TD CLASS="quote">the pic above says 7 ft/lbs, so just going to stick with that. Going to use the torque wrench, would hate to break one of them, such a head ache then.

Once again thanks for the help</TD></TR></TABLE>

I know the diagrahm says 7 ft lbs but trust me on this one, you don't want to tighten
them that much, they will most likely snap.

stupidfox

as far as helms go, I got one on CD of ebay for like $6 shipped. no flipping pages and i can print stuff off if i want to look at it in the garage.
for helms though, the haynes i have for my car sucks compared to the helms...pictures after just about every step!