searched and searched (h22a vs. f22a1+boost)
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: MN
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
searched and searched (h22a vs. f22a1+boost)
yeah yeah yeah, I know that this is such an old topic, blah blah,ok well, I have an 1996 prelude S yes the f22a1, ok and I also have the h22a engine with all the nesscary things, ok, do i just swap it and be like the rest of the poeple in h-t or do I boost the f22a1? I'm so confuesed, btw I can easily sell my h22a, I just don't know what to do?? I hear so many good things about the h22a but then many people have problems soon after swaping in there h22a. how much gains can I get with the f22a1? anyone know someone who ever had a build f22a1 prelude? Can anyone help me?
#3
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (InvaderTrax)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by InvaderTrax »</TD></TR><TR><TD CLASS="quote">
You can completely build up your F22A, turbo it, and still only make 200whp. You can make that much off an H22 with i/h/e and a few other things</TD></TR></TABLE>
False. He can build his F22a, boost, and have as much whp as he wants. I say stick with the f22a if you're boosting - if you're going all motor - go with the h22a.
You can completely build up your F22A, turbo it, and still only make 200whp. You can make that much off an H22 with i/h/e and a few other things</TD></TR></TABLE>
False. He can build his F22a, boost, and have as much whp as he wants. I say stick with the f22a if you're boosting - if you're going all motor - go with the h22a.
#4
Honda-Tech Member
Re: (TheKINGPin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheKINGPin »</TD></TR><TR><TD CLASS="quote">
False. He can build his F22a, boost, and have as much whp as he wants. I say stick with the f22a if you're boosting - if you're going all motor - go with the h22a. </TD></TR></TABLE>
False. He can build his F22a, boost, and have as much whp as he wants. I say stick with the f22a if you're boosting - if you're going all motor - go with the h22a. </TD></TR></TABLE>
#6
Re: (Rosko)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rosko »</TD></TR><TR><TD CLASS="quote">why not just boost the h22. arent there a ton more parts available for it.</TD></TR></TABLE>
He can run forged internals without having the block sleeved in his F22, unlike the H22. Forged internals = capable of handling more boost.
He can run forged internals without having the block sleeved in his F22, unlike the H22. Forged internals = capable of handling more boost.
#7
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: MN
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dougs96SI)
what do you guys think about the jdm f22b? I want to go boost. is this a better engine for boost? I have been researching and read that f22b is better for boost.
Trending Topics
#9
Re: (GaRn)
Boost the H22A there's not a problem with it boosting that engine. I know 3 guys with the boosted H22A and it's fine. Just have the right parts in it and tune it right and you'll be fine. 1 of the guy i know is pushing out 290whp and 210lbs of torque. Boring out to a 2.3L did a better job too. If you want to spend a lil more money bore it out to a 2.4L and you'll be pushing a lot more torque with the over siszed pistons. Stick with the H22A. The F22A is purely junk and not worth the money to build up.
#10
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99JDMTypeS »</TD></TR><TR><TD CLASS="quote">
Boost the H22A there's not a problem with it boosting that engine. I know 3 guys with the boosted H22A and it's fine. Just have the right parts in it and tune it right and you'll be fine. 1 of the guy i know is pushing out 290whp and 210lbs of torque. Boring out to a 2.3L did a better job too. If you want to spend a lil more money bore it out to a 2.4L and you'll be pushing a lot more torque with the over siszed pistons. Stick with the H22A. The F22A is purely junk and not worth the money to build up. </TD></TR></TABLE>
You should be banned for saying such dumb ****.
He can boost the f22a(and there are a million parts for it) and get just as much - if not more - than he would out of an h22a. There's nothing wrong with boosting either, but whatever motor you have, just boost it.
Boost the f22 h23 whatever you have. Forget JDM anything - it doesn't matter if you're changing the internals anyway.......
this guy above me obviously knows nothing. Who the hell would want to bore way out to a 2.4l just for boosting? Thats dumb as ****.
Boost whatever motor you currently have. Period.
If you want to go N/A, then go with an h22 or make one of those crazy combinations these people do nowadays.
Keep the f22, sell the h22, and use the money to put into the f22.
Boost the H22A there's not a problem with it boosting that engine. I know 3 guys with the boosted H22A and it's fine. Just have the right parts in it and tune it right and you'll be fine. 1 of the guy i know is pushing out 290whp and 210lbs of torque. Boring out to a 2.3L did a better job too. If you want to spend a lil more money bore it out to a 2.4L and you'll be pushing a lot more torque with the over siszed pistons. Stick with the H22A. The F22A is purely junk and not worth the money to build up. </TD></TR></TABLE>
You should be banned for saying such dumb ****.
He can boost the f22a(and there are a million parts for it) and get just as much - if not more - than he would out of an h22a. There's nothing wrong with boosting either, but whatever motor you have, just boost it.
Boost the f22 h23 whatever you have. Forget JDM anything - it doesn't matter if you're changing the internals anyway.......
this guy above me obviously knows nothing. Who the hell would want to bore way out to a 2.4l just for boosting? Thats dumb as ****.
Boost whatever motor you currently have. Period.
If you want to go N/A, then go with an h22 or make one of those crazy combinations these people do nowadays.
Keep the f22, sell the h22, and use the money to put into the f22.
#11
Honda-Tech Member
Join Date: Dec 2005
Location: willow spring, nc, usa
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
it just comes down to , do you want to roll with the crowd and have an h22a drop and swap, easy extra horsepower plus v-tech. or do you want to be different from the crowd and have a boosted f22. i personally can't think of a boosted f22 that i have seen. if you are going to boost it right, you will defntiley spend more money boosting the f22 with all the fuel and engine mangement needed than you would swapping in an h22a.
#12
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (h22a_junkie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a_junkie »</TD></TR><TR><TD CLASS="quote">it just comes down to , do you want to roll with the crowd and have an h22a drop and swap, easy extra horsepower plus v-tech. or do you want to be different from the crowd and have a boosted f22. i personally can't think of a boosted f22 that i have seen. if you are going to boost it right, you will defntiley spend more money boosting the f22 with all the fuel and engine mangement needed than you would swapping in an h22a.</TD></TR></TABLE>
Thats complete bullshit. You should be banned also. You will NOT spend more money boosting an f22. Thats such bullshit.
Boost the f22 because these ******* obviously don't know what they're talking about. And its VTEC not V-TECH - does it say "V-TECH" on your valve cover?........swapping in an h22a is just an extra headache for nothing. Boost the f22. Trust me. You don't necessarily have to sleeve the block with the f22 - but with the h22 you do unless you get the goldseries pistons. either way will cost the same exact amount. You'll have to change fuel on both engines, get engine management for both........it'll all be the same thing. Without the extra $2000 of boosting an h22(swap + sleeve job).
Save yourslef two grand and boost the f22. You will be able to stomp whatever h22 you find.
Where the hell IS everyone? Mgags7, precisionh23........everyone left me hanging - trying to tackle on these ignorant people. I guess you all gave up eh?
Thats complete bullshit. You should be banned also. You will NOT spend more money boosting an f22. Thats such bullshit.
Boost the f22 because these ******* obviously don't know what they're talking about. And its VTEC not V-TECH - does it say "V-TECH" on your valve cover?........swapping in an h22a is just an extra headache for nothing. Boost the f22. Trust me. You don't necessarily have to sleeve the block with the f22 - but with the h22 you do unless you get the goldseries pistons. either way will cost the same exact amount. You'll have to change fuel on both engines, get engine management for both........it'll all be the same thing. Without the extra $2000 of boosting an h22(swap + sleeve job).
Save yourslef two grand and boost the f22. You will be able to stomp whatever h22 you find.
Where the hell IS everyone? Mgags7, precisionh23........everyone left me hanging - trying to tackle on these ignorant people. I guess you all gave up eh?
#13
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (h22a_junkie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22a_junkie »</TD></TR><TR><TD CLASS="quote">it just comes down to , do you want to roll with the crowd and have an h22a drop and swap, easy extra horsepower plus v-tech. or do you want to be different from the crowd and have a boosted f22. i personally can't think of a boosted f22 that i have seen. if you are going to boost it right, you will defntiley spend more money boosting the f22 with all the fuel and engine mangement needed than you would swapping in an h22a.</TD></TR></TABLE>
Damn, you have no clue what you're talking about either. v-tech?...WTF?
You'll spend less boosting an F22 because the sleeves are already iron and you don't have to shell out $1000+ for sleeving....just drop some forged pistons right in. The 'fuel and engine management needed' is no different between a well boosted H22 or F22 or whatever...just specific tuning for each engine.
Nothing wrong with an F22 just less potential from the head.
Damn, you have no clue what you're talking about either. v-tech?...WTF?
You'll spend less boosting an F22 because the sleeves are already iron and you don't have to shell out $1000+ for sleeving....just drop some forged pistons right in. The 'fuel and engine management needed' is no different between a well boosted H22 or F22 or whatever...just specific tuning for each engine.
Nothing wrong with an F22 just less potential from the head.
#15
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
I say just keep the head port and polish - get a nice valvetrain setup and you're good to go.
But i guess using the h22 head is possible - a little bit of work....go for it. Do whatever you wish - its a project car.
But i guess using the h22 head is possible - a little bit of work....go for it. Do whatever you wish - its a project car.
#16
Honda-Tech Member
Join Date: Jan 2004
Location: Further down the spiral, TX, usa
Posts: 10,629
Likes: 0
Received 1 Like
on
1 Post
Re: (korney)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by korney »</TD></TR><TR><TD CLASS="quote">what about swaping the head and then boosting? would be useing my h22a head a good idea? </TD></TR></TABLE>
It's a much better head and if you do it right, you won't have any problems....it's just a bigger task than boosting the straight F22.
It's a much better head and if you do it right, you won't have any problems....it's just a bigger task than boosting the straight F22.
#17
Honda-Tech Member
Join Date: Nov 2002
Location: northern DRUNKit, ma
Posts: 3,969
Likes: 0
Received 6 Likes
on
4 Posts
Re: (GaRn)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GaRn »</TD></TR><TR><TD CLASS="quote">swap the h22 head on the f22, then boost it.</TD></TR></TABLE>
this one has my vote.
its rediculous how much miss information there is in just this thread. its sad that for every post one person makes another has to come in and correct them.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">
It's a much better head and if you do it right, you won't have any problems....it's just a bigger task than boosting the straight F22. </TD></TR></TABLE>
this is true. and if you put forged pistons into your motor you will be one step ahead of everyone else thats boosting on the weak stock pistons. if you had the money you could even get stronger after market rods. but with a dohc head your going to make more hp per psi than a sohc on a stock for stock comparison. port sizes and intake manifold design is alot better on the h22. for boost i would slightly build the botom end of your f22 and put the h22 head on.
this one has my vote.
its rediculous how much miss information there is in just this thread. its sad that for every post one person makes another has to come in and correct them.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 »</TD></TR><TR><TD CLASS="quote">
It's a much better head and if you do it right, you won't have any problems....it's just a bigger task than boosting the straight F22. </TD></TR></TABLE>
this is true. and if you put forged pistons into your motor you will be one step ahead of everyone else thats boosting on the weak stock pistons. if you had the money you could even get stronger after market rods. but with a dohc head your going to make more hp per psi than a sohc on a stock for stock comparison. port sizes and intake manifold design is alot better on the h22. for boost i would slightly build the botom end of your f22 and put the h22 head on.
#18
Re: searched and searched (korney)
I've heard peeps using the Mahle Gold Pistons without sleeving their block and having good results with boosting the H22 on stock FMR sleeves. Anyone have any success stories? That would be my vote, rebuild the h22 for boost and throw it in your car. Sure it will cost more but the F22 head is SOHC vs the DOHC head of the H22. just my 2c.
#19
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
https://honda-tech.com/zerothread?id=1406865
Everyone has been successful with the exception of the people that had the pistons when they first came out.
Everyone has been successful with the exception of the people that had the pistons when they first came out.
#20
A lot of people posted without having any clue what they're talking about. The F22 is a great motor. There's a guy who is making 315whp/297ft/lbs on the stock bottom end. Sell the H22 and use the money to put in forged pistons, chip a p06, and boost. You'll stomp an H22.
#21
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
Re: (I R Tylor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I R Tylor »</TD></TR><TR><TD CLASS="quote">A lot of people posted without having any clue what they're talking about. The F22 is a great motor. There's a guy who is making 315whp/297ft/lbs on the stock bottom end. Sell the H22 and use the money to put in forged pistons, chip a p06, and boost. You'll stomp an H22.</TD></TR></TABLE>
Hm. That sounds very familiar.......now where have I heard that before?.......oh someone is agreeing with me.
Hm. That sounds very familiar.......now where have I heard that before?.......oh someone is agreeing with me.
#22
Re: (TheKINGPin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheKINGPin »</TD></TR><TR><TD CLASS="quote">
Hm. That sounds very familiar.......now where have I heard that before?.......oh someone is agreeing with me. </TD></TR></TABLE>
That's because you're right.
Hm. That sounds very familiar.......now where have I heard that before?.......oh someone is agreeing with me. </TD></TR></TABLE>
That's because you're right.
#23
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: MN
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Re: (I R Tylor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I R Tylor »</TD></TR><TR><TD CLASS="quote">A lot of people posted without having any clue what they're talking about. The F22 is a great motor. There's a guy who is making 315whp/297ft/lbs on the stock bottom end. Sell the H22 and use the money to put in forged pistons, chip a p06, and boost. You'll stomp an H22.</TD></TR></TABLE>
who is the that guy with 315whp? is there a post here in honda-tech?
who is the that guy with 315whp? is there a post here in honda-tech?
#24
Re: (korney)
http://www.cb7tuner.com/vbb/sh...pp=15
Part of the way down. It's an F22A4 in an Accord.
Edit: also it's tuned with a safc. I read somewhere he had to retard the distributor 15*.
Part of the way down. It's an F22A4 in an Accord.
Edit: also it's tuned with a safc. I read somewhere he had to retard the distributor 15*.
#25
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: MN
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Re: (I R Tylor)
doesnt the f22 in the accords have vtec? and only the f22a1 doesnt have vtec? <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I R Tylor »</TD></TR><TR><TD CLASS="quote">http://www.cb7tuner.com/vbb/sh...pp=15
Part of the way down. It's an F22A4 in an Accord.
Edit: also it's tuned with a safc. I read somewhere he had to retard the distributor 15*.</TD></TR></TABLE>
thanks for the help
Part of the way down. It's an F22A4 in an Accord.
Edit: also it's tuned with a safc. I read somewhere he had to retard the distributor 15*.</TD></TR></TABLE>
thanks for the help