Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda Prelude
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
LinkBack Thread Tools Search this Thread
Old 06-08-2008, 01:24 PM   #1
 
JCapBB4's Avatar
 
Join Date: Jun 2008
Location: Livermore, CA, United States
Posts: 6
iTrader Rating: (0)
Send a message via AIM to JCapBB4
Default Pressure Washing the Engine Bay - Is it safe?

So I have a pressure washer for the day and I wanted to take advantage of it... Is it safe to pressure wash the engine bay? I'd like to get all the grime out of the nooks and crannies, but I don't want to damage anything. I think it's putting out about 16PSI but it feels lower... Also, if it is safe, are there any things I should cover before taking the washer to it?

This may be a stupid question, but I want to be safe. Click the image to open in full size. Also, I only have it for the day, so quick replies would be good. Click the image to open in full size.
__________________
1993 Honda Prelude Si
JCapBB4 is offline   Reply With Quote
Old 06-08-2008, 01:55 PM   #2
Honda-Tech Member
 
IAluder95's Avatar
 
Join Date: Jun 2004
Location: Des Moines, iowa, US
Posts: 951
iTrader Rating: (1)
Send a message via AIM to IAluder95
Default

i do every time i wash my car. hasnt done anything yet.
__________________
My h23Vtec Boost Build
478WHP 428 WTQ 9.42@98mph 1/8th mile w/o DR
IAluder95 is offline   Reply With Quote
Old 06-08-2008, 01:57 PM   #3
Honda-Tech Member
 
lude98SH's Avatar
 
Join Date: Dec 2004
Location: Drexel Hill, Pa, 19026
Posts: 2,793
iTrader Rating: (0)
Default Re: (IAluder95)

its all about tip selection. I believe a 15 degree tip would be ok. But i dont think i would go any lower.
__________________
WTB: t2w4 transmission
Progress rear sway bar
Dry nitrous kit
lude98SH is offline   Reply With Quote
Old 06-08-2008, 02:06 PM   #4
Honda-Tech Member
 
Acidcrakker's Avatar
 
Join Date: Aug 2007
Posts: 3,892
iTrader Rating: (0)
Default Re: (lude98SH)

Very nice. Use the following method as precaution.

1. Use Simple Green

2. Wrap Air filter in a plastic bag and tap shut.

3. Remove Altenator

4. cover the fuse box with plastic bag and tape shut.

Have fun and let it air dry for an hour or two.
__________________
Jim- 13.9 @ 103 mph
Don't crimp bitch
Acidcrakker is offline   Reply With Quote
Old 06-08-2008, 02:24 PM   #5
Honda-Tech Member
 
mattsnooz's Avatar
 
Join Date: Feb 2007
Location: k town, ontario, canada
Posts: 1,956
iTrader Rating: (0)
Default Re: Pressure Washing the Engine Bay - Is it safe? (JCapBB4)

I would also disconnect battery and even pull it

I wouldn't even pressure wash my engine bay period though. Hand cleaning takes way longer but water and electronics and pressure are all a bad combo for problems.

Just be smart. don't shoot at electronics period and cross your fingers I guess.

I guess it comes down to if its a "show" car or track car... sounds like an unnecessary risk though to save a couple hours (in my opinion, no offense to anybody at all)
__________________
h23, the stroke is long, and strong, and she wants to get the friction on.
http://www.comfortcurtains.totalwarehouse.com
mattsnooz is offline   Reply With Quote
Old 06-08-2008, 02:33 PM   #6
Junior Member
 
Mikej425's Avatar
 
Join Date: Apr 2008
Location: 256, AL, United States
Posts: 200
iTrader Rating: (0)
Send a message via AIM to Mikej425
Default Re: Pressure Washing the Engine Bay - Is it safe? (JCapBB4)

cover any air filters and be careful around the dizzy, if the cap gets wet your car will run terrible til it dries. and avoid spraying alot on the battery and fuse box
__________________
"I'm SO-phisticated, fresh from antarctica my wrist just made it"

Official ej6 team member #132
vouches: 96civic_hb http://images.honda-tech.com/set1/smile/emthup.gif http://is.rely.net/1-92-56342-l-HDIv...QjldAGcqmQ.gif
KMA Motorsports http://images.honda-tech.com/set1/smile/emthup.gif
Mikej425 is offline   Reply With Quote
Old 06-08-2008, 02:46 PM   #7
Junior Member
 
no1knows908's Avatar
 
Join Date: Jun 2007
Location: N.O., Louisiana, United States
Posts: 505
iTrader Rating: (0)
Send a message via AIM to no1knows908
Default Re: Pressure Washing the Engine Bay - Is it safe? (mattsnooz)

A bucket of 50/50 Simple Green and water plus a kitchen sponge worked wonders. Oil sludge nor power steering fluid could hold up against it. Click the image to open in full size. Like mentioned before, use common sense and cover anything that may be water sensitive. And I would definitely recommend removing the battery completely.
__________________
FS: SS Megan Prelude SH Header
no1knows908 is offline   Reply With Quote
Old 06-08-2008, 02:55 PM   #8
Honda-Tech Member
 
Acidcrakker's Avatar
 
Join Date: Aug 2007
Posts: 3,892
iTrader Rating: (0)
Default Re: Pressure Washing the Engine Bay - Is it safe? (no1knows908)

The battery. How could I forget.

Never would of thought to hand wash the bay.
__________________
Jim- 13.9 @ 103 mph
Don't crimp bitch
Acidcrakker is offline   Reply With Quote
Old 06-08-2008, 03:38 PM   #9
 
JCapBB4's Avatar
 
Join Date: Jun 2008
Location: Livermore, CA, United States
Posts: 6
iTrader Rating: (0)
Send a message via AIM to JCapBB4
Default Re: Pressure Washing the Engine Bay - Is it safe? (Acidcrakker)

I went and bought some engine degreaser as well. Click the image to open in full size. Thanks for the tips, guys. I'm gonna get started.

Also, I don't know why the topic still shows my "Prsssure" typo after I edited it. Click the image to open in full size. The only reason I care is for future searches and whatnot. So yeah, is there a way to fix that or could a mod change it? Click the image to open in full size.
__________________
1993 Honda Prelude Si
JCapBB4 is offline   Reply With Quote
Old 06-08-2008, 06:51 PM   #10
Honda-Tech Member
 
spoonfedcrx's Avatar
 
Join Date: Oct 2005
Posts: 445
iTrader Rating: (0)
Default

i just go to carwash, leave car running, hose down engine with some walmart engine degreaser and hose away. I wouldnt waste ur time removing alternator and battery. i dont even cover distrbutor or airbox. just dont be a maniac with where you're spraying.
spoonfedcrx is offline   Reply With Quote
Old 06-08-2008, 07:34 PM   #11
Honda-Tech Member
 
G2IntegraGS's Avatar
 
Join Date: Mar 2006
Location: Baton Rouge, LA, U.S.A
Posts: 544
iTrader Rating: (0)
Send a message via AIM to G2IntegraGS
Default Re: (spoonfedcrx)

Watch your plug wire if u have them exposed. Ive had that problem b4.
__________________
1994 Prelude SI H22A M2B4:14.40 @ 96.8 mph
FS: CF sunroof panel. *FS:H22A Cylinder head* http://www.hondamarketplace.com/show...php?t=2548226"
G2IntegraGS is offline   Reply With Quote
Old 06-08-2008, 08:10 PM   #12
Honda-Tech Member
 
RaysBoomBoomLude's Avatar
 
Join Date: Jul 2005
Location: LAkeWorth, fl
Posts: 1,132
iTrader Rating: (0)
Send a message via AIM to RaysBoomBoomLude
Default FV-QR

It will be fine.

I mean if you dont drown it.

It will work out fine.

__________________
Need A hosted Exchange?

Contact Me.
RaysBoomBoomLude is offline   Reply With Quote
Old 06-08-2008, 08:13 PM   #13
Honda-Tech Member
 
Acidcrakker's Avatar
 
Join Date: Aug 2007
Posts: 3,892
iTrader Rating: (0)
Default Re: (spoonfedcrx)

Holy ****! Are you outta your mind. Leave the car running while you hose down the bay. Thats a good way to crack the block. ANd for the altenator. Ive fried 2 of them before when using gunk to clean the bay.

Take your time when doing this. Half assing this will only lead to headaches and problems.
Quote:
Originally Posted by spoonfedcrx
i just go to carwash, leave car running, hose down engine with some walmart engine degreaser and hose away. I wouldnt waste ur time removing alternator and battery. i dont even cover distrbutor or airbox. just dont be a maniac with where you're spraying.
__________________
Jim- 13.9 @ 103 mph
Don't crimp bitch
Acidcrakker is offline   Reply With Quote
Old 06-09-2008, 12:42 AM   #14
 
JCapBB4's Avatar
 
Join Date: Jun 2008
Location: Livermore, CA, United States
Posts: 6
iTrader Rating: (0)
Send a message via AIM to JCapBB4
Default Re: (Acidcrakker)

Well I decided to pass on the pressure washer and just used the degreaser and a regular hose to rinse it off. I removed the battery and my intake filter, blocked off the intake opening, covered the distributer, covered the fuse box and surrounding wires. It cleaned it up pretty well, but it wasn't exactly what I hoped for...

Anyways, I had one problem, though. My car was in the street and at somewhat of an angle, so a puddle of water built up on one end of the groove in the center of the valve cover where the spark plug wires are (H23 by the way), and I did my best to soak it up and prevent it from getting down to the spark plug, but I think some did anyways... So I fired her up to get the rest dry and she was running a little rough...

About two hours later I had to drive for about 35 miles and she was running pretty rough, but I wasn't too worried about it as I read somewhere it's happened before with someone else and it ended up being fine after a while. There was definitely a loss in performance, and when driving in first gear, it felt as if the e-brake was on. So about 5 minutes into my drive, I hit some traffic and notice smoke coming from the bottom of my car, so I pull to the shoulder and check it out. The smoke wasn't coming from the engine, or out of the exhaust (phew), but it seemed to be coming from the middle of the exhaust. After looking at it for a while, the muffler made a couple popping sounds and the smoke started to clear up a bit, and she started to run smoother. So I went on with my drive and she was back to normal...

I'm convinced maybe one of the cylinders weren't firing properly, but I can't be sure. What do you guys think, does that sound right? She seems completely fine now, which is a relief.

Anyways, I just wanted to make sure to let you all know to cover up those spark plug wires, like G2IntegraGS said earlier. Either that or angle the car so the water can drain properly (right to left, if you're looking at the engine from the front). Thanks for the help, and hope this helps anyone else trying to clean up their engine bay. Click the image to open in full size.
__________________
1993 Honda Prelude Si
JCapBB4 is offline   Reply With Quote
Old 06-12-2008, 04:20 PM   #15
Honda-Tech Member
 
spoonfedcrx's Avatar
 
Join Date: Oct 2005
Posts: 445
iTrader Rating: (0)
Default

ive cleaned tons of engine bays my way and have yet to run into any problems. like i said dont be a maniac.

have u ever seen someone crack their block pressure washing their motor?

u can call it halfassing all u want have fun taking ur alternator and battery out and putting bags on ****.
spoonfedcrx is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Tags
acura, bay, cleaning, degreasing, engine, honda, livermore, prelude, run, safe, tech, terrible, tl, wash, washing

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Y-49 Restoration, Project CLEAN. CRXed Honda CRX / EF Civic (1988-1991) 64 01-08-2008 01:03 PM
IS IT SAFE TO NITROUS ON A B18C5 B-motor Acura Integra Type-R 10 11-08-2006 09:18 PM
Aircon almost removed! ibme_uk Acura Integra Type-R 27 05-26-2005 06:30 AM
Dyno day with with the boosted-hybrid squad sway892 Forced Induction 43 06-25-2004 06:16 AM
cam gear cover on or off Jdmcivic98 Honda Civic/Del Sol (1992 - 2000) 6 05-13-2004 05:24 PM



All times are GMT -8. The time now is 05:31 AM.



2014 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.8.7 AC1
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details