motor debate
01-02-2006, 06:38 PM
#1
Thread Starter
Join Date: Sep 2005
Location: wichita, ks, sedgwick
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
motor debate
ok i know this is the all time asked ?, i have a 92 si and 93 si blown motor both have the h23 i want to make a killer motor hp wise, but dont know what motor to build i would like to hit 400hp + with turbo someone tell me the best motor to get me there cause i already have a h23 laying here
01-02-2006, 06:44 PM
#3
Join Date: Jan 2005
Location: Springfield, va, us
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
in my opinion i would say use the h22a vtec get a head gasket AEM ems. and a t4 turbo with some injectors and a fuel pump tuned you should be puttin out more then that what your lookin for. if that helps at all.
01-02-2006, 07:06 PM
#4
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
???? NO. !!!!!
Keep the h23 and boost the **** out of it. Precisionh23a has/had a killer h23 boosted. You can do some crazy things with that motor - vtec isn't everything. Just remember, when boosting, you can keep whatever motor you want - as long as you build it right, the sky is the limit.
Keep the h23 and boost the **** out of it. Precisionh23a has/had a killer h23 boosted. You can do some crazy things with that motor - vtec isn't everything. Just remember, when boosting, you can keep whatever motor you want - as long as you build it right, the sky is the limit.
01-02-2006, 08:32 PM
#7
Honda-Tech Member
Join Date: Sep 2005
Location: Knoxville, TN, United States
Posts: 2,905
Likes: 0
Received 1 Like
on
1 Post
Re: (Dougs96SI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dougs96SI »</TD></TR><TR><TD CLASS="quote">Since you have two blown Si's send one block off to be sleeved and use the other as a temporary piece.</TD></TR></TABLE>
What he said. Good sleeves and strong pistons (and connecting rods, reinforced crank, etc) and you can boost that thing to 400whp
What he said. Good sleeves and strong pistons (and connecting rods, reinforced crank, etc) and you can boost that thing to 400whp
Thread
Thread Starter
Forum
Replies
Last Post
xxredpreludesixx
All Motor / Naturally Aspirated
40
05-17-2005 07:12 PM