lowering my lude...
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Maine
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
lowering my lude...
i know this may be a dumb question but im not to educated with the ludes yet, i have always owned eg's and they r so easy to lower... but, this lude threw me a curve ball, my upper control arms in the front are hitting up in my wheel well... do i have to do a knuckle conversion? if so wats the best to use?
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Maine
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
2.25" with skunk2 springs. it rides and handles great but when i hit a bump i can hear my upper control arms hitting. and when i open my hood u can see the marks where its hitting
#4
Honda-Tech Member
Join Date: Mar 2005
Location: Biloxi, MS, USA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
if you're just lowering to lower, don't go too low. i can't remember how low is too low for a lude, but lower does not always equal better handling.
why would your hood be getting dinged? did you tighten up the nuts on top of the strut?
why would your hood be getting dinged? did you tighten up the nuts on top of the strut?
#5
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Maine
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
i lowered it according to what skunk2 thought was right. they are just the springs on stock struts, not coil overs. my hood isnt dinged, it where the upper control arm bottoms out, the top of the ball joint hits when i go over a bump. u can see the dings when u lift the hood, close to where the top of the strut is. and yes, everything is tight lol
#7
Re: lowering my lude...
Make sure you installed them the right wa,y maybe u didnt put on the bumpstops on the shocks? If all of that is fine then well u might just have to do some slight modification to your shock tower.
Trending Topics
#8
Honda-Tech Member
Join Date: Jun 2008
Location: Dickinson, ND, usa
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
something must be installed wrong. cuz theres no way your upper control arm should hit your inner fender well. go through and look everything over maybe get us some pics to see if we can find anything wrong.
#9
Honda-Tech Member
Join Date: Mar 2008
Location: Montreal, QC
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
if its low enough it will hit.
But for sure your bump stops are either finished or not present. Buy 4 new bump stops and cut the top section off of them. Should be enough to stop your issue.
But for sure your bump stops are either finished or not present. Buy 4 new bump stops and cut the top section off of them. Should be enough to stop your issue.
#10
Re: lowering my lude...
did u have the spc upper ball joints that are adjustable for camber? if so they have a huge nut on the top to hold them on and they hit the inner fender well pretty nasty.
My upper control arms hit with the stock upper ball joints, but thats cause im very low.
My upper control arms hit with the stock upper ball joints, but thats cause im very low.
#12
Honda-Tech Member
Join Date: Dec 2004
Location: Oklahoma City, OK, USA
Posts: 3,095
Likes: 0
Received 0 Likes
on
0 Posts
#13
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Maine
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: lowering my lude...
ya they are spc ball joints on my upper control arms, i noticed that huge nut haha i was wondering if that may be the issue... i put new bump stops in when i did the springs because when i took them apart they were shot. i will work on getting pics but i dont hava digi cam anymore, my 19 month old destroyed it lol
#14
Honda-Tech Member
Re: lowering my lude...
damn 19 month olds!! u should take a pic of the haha strut tower mud flaps you made bro!! not a bad idea for the rest of the bb2 owners with the spc ball joints! worked for you..
Thread
Thread Starter
Forum
Replies
Last Post
1993_EJ1
Honda Civic / Del Sol (1992 - 2000)
3
01-05-2011 11:51 PM