JDM H22 valve springs: single and/or dual? Expert advice needed
01-07-2005, 04:40 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2002
Location: Allen, TX
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
JDM H22 valve springs: single and/or dual? Expert advice needed
I have never cracked open a JDM H22 or JDM H22 Type-S head before, but I was led to believe that the JDM head had single valve springs and the Type-S head had single valves springs on the intake side and dual springs on the exhaust side. I just found someone selling what he claims are springs from a JDM, not Type-S, motor he pulled from a junkyard in Cali. Check them out. Anything wrong with this picture?
01-07-2005, 09:12 AM
#3
Junior Member
Thread Starter
Join Date: Oct 2002
Location: Allen, TX
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
Re: (PrettyLude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrettyLude »</TD></TR><TR><TD CLASS="quote">the jdm ones i have seen before have had dual springs on both sides</TD></TR></TABLE>
So then what makes the Type-S springs different?
So then what makes the Type-S springs different?
01-07-2005, 09:25 AM
#5
Member
Join Date: Nov 2004
Location: NorCar!?
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: (dominate9)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dominate9 »</TD></TR><TR><TD CLASS="quote">
So then what makes the Type-S springs different?</TD></TR></TABLE>
theyre harder.....
never knew they were dual'ers stock though
So then what makes the Type-S springs different?</TD></TR></TABLE>
theyre harder.....
never knew they were dual'ers stock though
01-07-2005, 01:17 PM
#7
Honda-Tech Member
Join Date: Apr 2002
Location: Szczecin, Poland
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
Re: (superjunprelude)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by superjunprelude »</TD></TR><TR><TD CLASS="quote">yea both motors have dual valve springs even usdm ones only b series have dual valve spring on one side which is intake side</TD></TR></TABLE>
except Type R I believe... which is supposed to have dual springs on both sides.
except Type R I believe... which is supposed to have dual springs on both sides.
Thread
Thread Starter
Forum
Replies
Last Post
