How to tell if my h22a4 was Turbo
05-01-2009, 10:12 AM
#1
Thread Starter
Join Date: Apr 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
How to tell if my h22a4 was Turbo
I bought an h22a4 complete block i noticed that the engine already had skunk2 cam gears and it also has aftermarket camshafts ... there is a hole in the oil pan that looks like it would have been a tap for a turbo.
I am worried that the camshafts are fror forced induction only .... how can i tell if the cams are for forced induction or N/A
Any help is much appreicated!
I am worried that the camshafts are fror forced induction only .... how can i tell if the cams are for forced induction or N/A
Any help is much appreicated!
05-01-2009, 11:13 AM
#2
Daughter not possible
Join Date: Sep 2007
Location: In a lake of vaginal juices
Posts: 1,742
Likes: 0
Received 3 Likes
on
3 Posts
Re: How to tell if my h22a4 was Turbo
measure them. or drive the car and if its slower than stock...well...
turbo cams are going to have less duration/overlap cause it bleeds boost.
I think... but its been a long time since I game a damn lol.
turbo cams are going to have less duration/overlap cause it bleeds boost.
I think... but its been a long time since I game a damn lol.
05-01-2009, 01:02 PM
#3
Junior Member
Join Date: Oct 2007
Location: grand rapids, mi, us
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Re: How to tell if my h22a4 was Turbo
remove the valve cover and check for any etched part numbers.
otherwise its time to use the dial calipers and reference stock cam and turbo cam profiles.
otherwise its time to use the dial calipers and reference stock cam and turbo cam profiles.
Thread
Thread Starter
Forum
Replies
Last Post
EL-Teg98
Honda Civic / Del Sol (1992 - 2000)
1
11-15-2001 05:20 PM
