ralpheezy

I have a CEL on right now. I took it to two different places to see if they could read what the code is but they both said they can't do it with OBD1 cars.

Is this true? If not, how would I get the code?

btw search keeps coming up as error.

mgags7

there is a 2-pin connector behind the radio on the driver side. jump those two wires.

giddyup21

Jump the 2 pin connector (you can use a paperclip or wire), with the key out. Then put the key in, turn it to on but don't start it. Watch your CEL flash on the screen. A long flash = 10, a short flash = 1. Add it all up and that's your code.

graham b

obd1 has the 3 pins and u connect the 2 on the outside.right?

i have obd2 and its the 2 pin, just pulled it today

http://www.preludezone.com/showthread.php?t=2363

ralpheezy

when it flashes will it flash the code just once or will it repeat?

thanks for the responses guys. and thanks for the link too.

m00nr0ck Si

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ralpheezy &raquo;</TD></TR><TR><TD CLASS="quote">when it flashes will it flash the code just once or will it repeat?

thanks for the responses guys. and thanks for the link too.</TD></TR></TABLE>

it will flash the first digit slow and the second digit fast and then continue to repeat

M2B4

odb1 is 2 pin trust me done it plenty of times. and it will flash the codes 3 times.

ralpheezy

i went down there today and i had a yellow connector that wasn't plugged into anything. it was a 2 pin so i tried it but i couldn't get any codes from it.

is it because my CEL would go away and only come every once in a while or could i have just used the wrong connector? is the connector supposed to blue just like the ones in the picture?

giddyup21

CEL should be stored until you reset your ECU by disconnecting your battery.... meaning you did it wrong.