help!!, removing the low beam bulbs
12-30-2005, 07:55 AM
#1
Thread Starter
Join Date: Dec 2001
Location: Austin, TX, U.S
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
help!!, removing the low beam bulbs
96 s module prelude
So I've done all the searches but cant come up on anything.
I need some help taking out the low beam headlights. Is there
something that needs to be removed to take the bulbs out??
So I've done all the searches but cant come up on anything.
I need some help taking out the low beam headlights. Is there
something that needs to be removed to take the bulbs out??
12-30-2005, 08:00 AM
#2
Join Date: Jun 2005
Location: The Wizard Of Oz, State Rd 1505, Section 8
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
?????
Just turn and pull. The unplug the bulb........??? If you can't turn it, get a flat head and a mallet. Hit it on the side and it should turn.
Just turn and pull. The unplug the bulb........??? If you can't turn it, get a flat head and a mallet. Hit it on the side and it should turn.
12-30-2005, 10:06 AM
#3
Junior Member
Join Date: Sep 2002
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
Take out the female bulb harness, and then you should be able to see that the bulb is secured by a metal spring. Push down and pull out on the spring, and the bulb should become loose by then.
12-30-2005, 11:45 AM
#4
Thread Starter
Join Date: Dec 2001
Location: Austin, TX, U.S
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kb798)
Thx for the help up to this point.
This is where I'm at.
I took out both low beams. I swapped them to see it the good bulb would work
and nothing. Does it matter what side they are in and does it matter if I'm testing it
while its dangling on the bulb harness. Does it have to be locked into the actual headlight just to test it? I pulled out the high beam to see if it was a diffierent bulb
and sure enough it is. Now all three don't work. I'm going crazy over here. Feel like
a jack a@@. Can I get some more help on this.
thx
This is where I'm at.
I took out both low beams. I swapped them to see it the good bulb would work
and nothing. Does it matter what side they are in and does it matter if I'm testing it
while its dangling on the bulb harness. Does it have to be locked into the actual headlight just to test it? I pulled out the high beam to see if it was a diffierent bulb
and sure enough it is. Now all three don't work. I'm going crazy over here. Feel like
a jack a@@. Can I get some more help on this.
thx
Thread
Thread Starter
Forum
Replies
Last Post
xkrntamax
Honda Accord (1990 - 2002)
5
07-31-2006 08:22 AM
