preludelovr96

so I have replaced my slave cylinder and my master cylinder, I have also installed a steel braided clutch line bypassing the damper(line from master straight to slave cylinder). I bled the lines for forever, was not working. I got a hose and put it on the slave bleeder and put the other end in a cup of brake fluid and I left the bleeder open. I bled until the air was out, I got some pressure but not all. The pedal only has pressure for about half way on the bottom end. Any tips? am I doing anything wrong? why is the clutch not fully pressured, if there is no air in the lines and I know there isnt any leaks?



also, what do I do with the existing hard lines? are there plugs of some sort to fill the holes in the damper?



Please help guys and if you do thanx for your time.