Check Enginer Light On: P0118
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2004
Location: San Ramon, CA, USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Check Enginer Light On: P0118
My 1998 CR-V sometimes has its Check-Enginer light turns on. Diagnostic code reader shows error code: P0118 (Engine coolant temperature high input). This Check-Engine light may turns on after it idles for a while, not always. The light will turn off after couple of days. I assume once Check-Engine light turns on, it will continue on until we manually reset it.
#3
Former Moderator
Re: Check Enginer Light On: P0118
Check the coolant level - that code can trigger when the coolant level is so low that the ECT does not get coolant passing over it, and thus, it reads way out of normal range.
#4
Technical Hero
Join Date: May 2002
Location: Charlotte, NC, 28227
Posts: 9,876
Likes: 0
Received 28 Likes
on
20 Posts
Re: Check Enginer Light On: P0118
Also check the wiring going to it. Its seem the ECT wiring gets the brunt of damage from valve cover oil leaks often cracking and degrading the wiring going to it.
TW Sensor labeled in this pic
TW Sensor labeled in this pic
#5
Thread
Thread Starter
Forum
Replies
Last Post