'97 CRV won't start after rad/thermo replacement
#1
'97 CRV won't start after rad/thermo replacement
Howdy! I just replaced my radiator and thermostat on my '97 CRV (175k miles). After reconnecting all hoses, fans, the thermo ground, and the battery, I test drove and had no problems. After it sat in the driveway all night, I tried to drive it again; this time the engine would not turn over all the way and the oil/check engine/battery lights all came on (just like a stall). There is a small leak between the upper radiator mount and the engine which I plan on sealing tonight, but I wouldn't think that'd cause the problems I'm having. If anyone has experienced this or knows what's causing the engine to not turn over, I'd appreciate any advice. Thanks in advance!
Update: I double checked the thermo ground - it was solid. I then drained most of the coolant and and tried to restart (briefly) - Presto! It turned over no problem. Any idea what this means? Could it be the head gasket?
Update: I double checked the thermo ground - it was solid. I then drained most of the coolant and and tried to restart (briefly) - Presto! It turned over no problem. Any idea what this means? Could it be the head gasket?
Last edited by bartimus; 05-05-2011 at 04:07 PM.
#3
Re: '97 CRV won't start after rad/thermo replacement
Yes - I made sure it was screwed back in the top of the thermo cover. Also, would the car work last night and then quit if it was the thermo?
Thread
Thread Starter
Forum
Replies
Last Post
dearcrystal
Honda Civic / Del Sol (1992 - 2000)
8
01-30-2013 11:26 AM
1997, 97, 99, accord, car, clicking, crv, honda, radiator, replaced, replacement, start, therkostat, thermostat, wont