What to glue side window glass into bracket with? Silicone?
#1
Honda-Tech Member
Thread Starter
What to glue side window glass into bracket with? Silicone?
I'm replacing my power door lock motors/regulators on my sedan, and when I pulled out my window glass I noticed one of the two brackets that attaches itself to the glass has pulled off.
It looks like it was originally glued on with silicone or something.
What do I use to glue it back on with? I only want to do this once!
It looks like it was originally glued on with silicone or something.
What do I use to glue it back on with? I only want to do this once!
#4
Honda-Tech Member
Join Date: Jan 2003
Location: San Diego, CA, USA
Posts: 3,200
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jonathan_ED3)
window glass sealant.. just like they use to put the front windsheild on..
if you take it to a place that puts windows unless they are money grubbin..
they should give a dab for free..
I wouldn't use silicone since its not that strong in shear..
compared to the stuff thats was originally on there..
could use liquid nails too...from home depot or dixieline..
if you take it to a place that puts windows unless they are money grubbin..
they should give a dab for free..
I wouldn't use silicone since its not that strong in shear..
compared to the stuff thats was originally on there..
could use liquid nails too...from home depot or dixieline..
#5
Honda-Tech Member
Join Date: Oct 2004
Location: jimmysville VT,, NY, USA
Posts: 4,915
Likes: 0
Received 1 Like
on
1 Post
Re: (Outsane)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Outsane »</TD></TR><TR><TD CLASS="quote">window glass sealant.. just like they use to put the front windsheild on..</TD></TR></TABLE>
I tried that and when it gets real hot it would come unglued, i ended up using some stuff called GOOP has worked for a couple years now
I tried that and when it gets real hot it would come unglued, i ended up using some stuff called GOOP has worked for a couple years now
#6
Honda-Tech Member
Thread Starter
well in an effort to beat the rain, i used an extra strength two part epoxy. It seems to be holding up fine. Hopefully it will do alright long-term. I also lubed up my weatherstrip channels to make everything move easier.
#7
Honda-Tech Member
Join Date: Nov 2002
Location: I told you to wait in the truck in Texas, United States
Posts: 2,753
Likes: 0
Received 3 Likes
on
3 Posts
Re: (Jonathan_ED3)
That should work..
In the past,I have used a two part epoxy product called "quik-steel"
for this with very good results as long as it is "fresh"..
IE: if it has not been on the shelf too long..
It tends to get hard and brittle with age..
See: http://people.consolidated.net....html
{the one at the very top}
You can also add extra support/epoxy around the edges of the
brackets since the area can't be seen..
In the past,I have used a two part epoxy product called "quik-steel"
for this with very good results as long as it is "fresh"..
IE: if it has not been on the shelf too long..
It tends to get hard and brittle with age..
See: http://people.consolidated.net....html
{the one at the very top}
You can also add extra support/epoxy around the edges of the
brackets since the area can't be seen..
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
civiccoupe94
Honda Civic / Del Sol (1992 - 2000)
16
12-27-2005 04:01 PM
0ptimus prime
Honda Civic / Del Sol (1992 - 2000)
9
03-16-2004 09:37 AM