kyle1jzsupra

ok i searched for 20 mins lol and couldnt find it . i have a 90 hatch si and it has a d15b1 in it (bought it this way) now i found a zc motor for a good price i already have a mpfi swap. and was wondering what i need to be able to swap it in. thnx and btw would i need to swap trannys? or axels? and estimated swap time? lol

BILLETGRIP

http://members.aol.com/_ht_a/nosajuf/nosajuf.htm
http://www.phatwhippincrx.20m.com/photo6.html
http://thenew.gamesbbs.com/~dmoore/zc.htm
https://honda-tech.com/zerothread?id=1793626


all found in the FAQ

sc0braj

well.. i can tell you that you can do a straight swap without needing new motor mounts... but i've heard you need new axles or somethin.

kyle1jzsupra

i looked at all of it and read every page. the first page doesnt even say really anything. and, i read the swap page and it doesnt tell me what parts or things i need to swap just tells me how to put it in the car.

Red_ED8

iTrader: (1)

All you need is tools, zc's swap right in. You can even use stock axels (not 100% sure about the dohc zc). Are you looking to get a dohc or sohc zc?

kyle1jzsupra

well i can get a dohc for 200 with 5 spd trans needs cams and valves . or i can get a single cam for 250 that was in a crx and he said he ran 10's in 1/8th mile with it and he said has 80k original miles id rather have a single cam prob if its alot easier

jaywongwong

direct swap, you dont need anything for the dohc. all you have to do is wire up the cam sensor. this should help http://fourthgenhatch.net/zc.html#ZC

kyle1jzsupra

so im going to need a zc tranny and integra axles ? and the plug for the cam sensor? am i able to use my harness on my d15

kyle1jzsupra

anyone?