real assistance needed - no flamers
#1
Junior Member
Thread Starter
Join Date: Sep 2004
Location: maryland, U.S.A
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
real assistance needed - no flamers
im sure iw ill get flamed for this, but i need personal specific information. im currently looking at doing a ZC swap, and i need to figure out where i want to order my motor from. i know of quite a few places, but i really need to know info, so if you've gotten a zc o rany motors from anywhere and had good or bad experiances, please share.
thanks.
thanks.
#2
Honda-Tech Member
Join Date: Dec 2004
Location: Annapolis, MD, USA
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (Import_Dumbass)
There is a sticky thread at the top of CRX/EF forum page which is entitled: \\\\The Official "Where can I buy an engine/tranny/parts for my CRX/Civic!!////
But, to answer your question directly, I purchased a JDM 1st Gen B16 motor from Hmotors online and they were all very polite and they knew what they were selling. I would recommend them, along with 99.9% of everybody else on Honda-Tech. http://www.hmotorsonline.com
Tim
But, to answer your question directly, I purchased a JDM 1st Gen B16 motor from Hmotors online and they were all very polite and they knew what they were selling. I would recommend them, along with 99.9% of everybody else on Honda-Tech. http://www.hmotorsonline.com
Tim
#3
Junior Member
Join Date: Mar 2004
Location: Manheim, Pa, United States
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (naptownrex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by naptownrex »</TD></TR><TR><TD CLASS="quote">There is a sticky thread at the top of CRX/EF forum page which is entitled: \\\\The Official "Where can I buy an engine/tranny/parts for my CRX/Civic!!////
But, to answer your question directly, I purchased a JDM 1st Gen B16 motor from Hmotors online and they were all very polite and they knew what they were selling. I would recommend them, along with 99.9% of everybody else on Honda-Tech. http://www.hmotorsonline.com
Tim</TD></TR></TABLE>
same here, just got my jdm d15b vtec and it was clean, rapped like it could survive a neculear holocoust and very resonable priced
for hmotorsonline
But, to answer your question directly, I purchased a JDM 1st Gen B16 motor from Hmotors online and they were all very polite and they knew what they were selling. I would recommend them, along with 99.9% of everybody else on Honda-Tech. http://www.hmotorsonline.com
Tim</TD></TR></TABLE>
same here, just got my jdm d15b vtec and it was clean, rapped like it could survive a neculear holocoust and very resonable priced
for hmotorsonline
#5
Junior Member
Thread Starter
Join Date: Sep 2004
Location: maryland, U.S.A
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (swifty4u)
i appreciate your assistance everyone. ever heard of a place called nippon? http://www.nippon-motors.com i believe it is.
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2002
Location: colorado springs, co, usa
Posts: 5,645
Likes: 0
Received 28 Likes
on
28 Posts
Re: real assistance needed - no flamers (Import_Dumbass)
http://www.noyanusa.com/ - in manassas, virginia
#9
Junior Member
Join Date: Feb 2004
Location: Chesapeake, VA, USA
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (jlicrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx »</TD></TR><TR><TD CLASS="quote">http://www.noyanusa.com/ - in manassas, virginia</TD></TR></TABLE>
Got my D15B from them ,great place. Next motor will be from them or Hmotors.
Got my D15B from them ,great place. Next motor will be from them or Hmotors.
#10
Honda-Tech Member
Join Date: Feb 2004
Location: Great Falls, MT, USA
Posts: 822
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (swifty4u)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by swifty4u »</TD></TR><TR><TD CLASS="quote">dont go to osaka!
</TD></TR></TABLE>
x2 for sure
I went through this guy on ebay for 2 B16 w/lsd's called Jazzproparts. Totally screwed me, never got axles for either motor, one motor looked totally wrecked( the pallet that they came on had the motors sitting back to front and a bolt on the back of one rubbed through the valve cover of the other ) , terrible costumer support, never answered the phone for months after order was placed. Took three months and hundreds of phone calls to finally get my motors.
Osaka
Jazzproparts
Hmotors
</TD></TR></TABLE>
x2 for sure
I went through this guy on ebay for 2 B16 w/lsd's called Jazzproparts. Totally screwed me, never got axles for either motor, one motor looked totally wrecked( the pallet that they came on had the motors sitting back to front and a bolt on the back of one rubbed through the valve cover of the other ) , terrible costumer support, never answered the phone for months after order was placed. Took three months and hundreds of phone calls to finally get my motors.
Osaka
Jazzproparts
Hmotors
#11
Honda-Tech Member
Join Date: Feb 2005
Location: VA, USA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: real assistance needed - no flamers (MENACE)
+1 for noyanusa. I purchased my ZC swap from there. It arrived in good shape with only the TPS crushed somewhere in the neighborhood of $850 delivered.
#12
Honda-Tech Member
When buying motors, always deal with the reputable place even if its a little bit extra. Just so happens that hmotors is not only reputable, but their price are equal to or better then most. I say this from experience not from what I have read or heard.
#13
Honda-Tech Member
Re: real assistance needed - no flamers (Import_Dumbass)
HMotors Ive gotten 3 motors from them...they ship fast and the motors are CLEAN and very reliable!
Thread
Thread Starter
Forum
Replies
Last Post