Noisy Transmission after clutch install?
#1
Noisy Transmission after clutch install?
Hey fellas we just swapped in a new clutch/pressure plate/bearing/pilot bearing on to my buddys d16a6 engine
Now the car makes this anoying wuring/rattling noise when the clutch is out. Soon as you press the clutch in it stops.
Any input would be great.
Thanks
Now the car makes this anoying wuring/rattling noise when the clutch is out. Soon as you press the clutch in it stops.
Any input would be great.
Thanks
#3
Honda-Tech Member
Join Date: Nov 2006
Location: Kills, Maryland, USA
Posts: 1,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noisy Transmission after clutch install? (90efhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90efhatch »</TD></TR><TR><TD CLASS="quote">that sounds to me like you got a bad throwout bearing.</TD></TR></TABLE>
+1 Sounds like the throwout maybe going out on you.
+1 Sounds like the throwout maybe going out on you.
#5
Honda-Tech Member
Re: Noisy Transmission after clutch install? (IT GUY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IT GUY »</TD></TR><TR><TD CLASS="quote">did you grease the TO bearing?</TD></TR></TABLE>
#6
Honda-Tech Member
Join Date: Sep 2007
Location: portland, Or, USA
Posts: 836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noisy Transmission after clutch install? (Stoich)
If the noise goes away with the clutch in it is probably the pilot bearing in the
tranny. Tranny needs rebiuld.
tranny. Tranny needs rebiuld.
#7
Honda-Tech Member
Re: Noisy Transmission after clutch install? (rd91sib18c5r)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rd91sib18c5r »</TD></TR><TR><TD CLASS="quote">If the noise goes away with the clutch in it is probably the pilot bearing in the
tranny. Tranny needs rebiuld. </TD></TR></TABLE>
pilot bearing isn't in the transmission. It's in the flywheel.
tranny. Tranny needs rebiuld. </TD></TR></TABLE>
pilot bearing isn't in the transmission. It's in the flywheel.
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2007
Location: portland, Or, USA
Posts: 836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noisy Transmission after clutch install? (IT GUY)
Sorry I mean input shaft bearings, your right the plot bearing is in the
flywheel.
Modified by rd91sib18c5r at 11:41 PM 11/5/2007
flywheel.
Modified by rd91sib18c5r at 11:41 PM 11/5/2007
#10
Re: Noisy Transmission after clutch install? (IT GUY)
We installed a new pilot bearing and new TO bearing.
When you say greased the TO bearing what part are you referring to?
We lubed the shaft that the TO rides on.
When you say greased the TO bearing what part are you referring to?
We lubed the shaft that the TO rides on.
#12
Honda-Tech Member
Re: (Aristotle)
Bad input shaft bearing. Happens to all the honda manual transmissions.
When a throwout bearing has failed it makes noise when the clutch is depressed, NOT let out.
When a throwout bearing has failed it makes noise when the clutch is depressed, NOT let out.
Thread
Thread Starter
Forum
Replies
Last Post
cbmprelude
Honda Civic / Del Sol (1992 - 2000)
10
10-07-2006 03:12 PM