Need help on Dizzy wiring for B18B1 into the EF si???
05-29-2005, 07:47 PM
#1
Thread Starter
Join Date: Apr 2005
Location: San Antonio, Texas, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Need help on Dizzy wiring for B18B1 into the EF si???
This is what I figured.
si harness B18 dizzy
Blk/Yel -- Blk/Yel
Blu ------ Blu
white -------- Yel/Grn
Blu/Grn ----- white CYL
blu/yel ------- orange CYL
Orange ------- Blue/Yel Crank
white ------- blue/geen Crank
white/blu ----- white/blu TDC
org/blu -------- org/blu TDC
What do ya think? would it be correct?
si harness B18 dizzy
Blk/Yel -- Blk/Yel
Blu ------ Blu
white -------- Yel/Grn
Blu/Grn ----- white CYL
blu/yel ------- orange CYL
Orange ------- Blue/Yel Crank
white ------- blue/geen Crank
white/blu ----- white/blu TDC
org/blu -------- org/blu TDC
What do ya think? would it be correct?
Trending Topics
05-30-2005, 05:09 PM
#8
Honda-Tech Member
Join Date: May 2001
Location: Logan, Utah, U.S.
Posts: 1,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: (som1_2race)
obd-1 and 2 dizzy are the same kind, actually most are the same... even the plug, the plug was just made into one big plug not 2 like the obd-1. The pins are all the same. The obd-0 stuff is diffrent. Sorry it is a fact of life, even if it does start something will fry very soon.
If you wanna run obd-1 get an ecu, 4 wire o2 and conversion harness, if you wanna run obd-0 get an obd-0 ls dizzy...simple as that.
If you wanna run obd-1 get an ecu, 4 wire o2 and conversion harness, if you wanna run obd-0 get an obd-0 ls dizzy...simple as that.
05-30-2005, 06:51 PM
#10
Honda-Tech Member
Join Date: Jul 2003
Location: albany, ny, usa
Posts: 2,271
Likes: 0
Received 0 Likes
on
0 Posts
Re: (DohcVtecCrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DohcVtecCrx »</TD></TR><TR><TD CLASS="quote">obd-1 and 2 dizzy are the same kind, actually most are the same... even the plug, the plug was just made into one big plug not 2 like the obd-1. The pins are all the same. The obd-0 stuff is diffrent. Sorry it is a fact of life, even if it does start something will fry very soon.
If you wanna run obd-1 get an ecu, 4 wire o2 and conversion harness, if you wanna run obd-0 get an obd-0 ls dizzy...simple as that.</TD></TR></TABLE>
do not try to repin and obd 1 dizzy to run on an obd 0 ecu, you will do some serious damage
If you wanna run obd-1 get an ecu, 4 wire o2 and conversion harness, if you wanna run obd-0 get an obd-0 ls dizzy...simple as that.</TD></TR></TABLE>
do not try to repin and obd 1 dizzy to run on an obd 0 ecu, you will do some serious damage
05-31-2005, 04:45 PM
#11
Thread Starter
Join Date: Apr 2005
Location: San Antonio, Texas, USA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Serious damage to what? Dizzy or ECU
I already wired up the Dizzy to the wires stated up above but the car hasnt started or attemp to start only because the dizzy may have already been broken before the swap.
I already wired up the Dizzy to the wires stated up above but the car hasnt started or attemp to start only because the dizzy may have already been broken before the swap.
05-31-2005, 05:08 PM
#13
Honda-Tech Member
Join Date: Oct 2004
Location: jimmysville VT,, NY, USA
Posts: 4,915
Likes: 0
Received 1 Like
on
1 Post
Re: Need help on Dizzy wiring for B18B1 into the EF si??? (som1_2race)
it will not fry, it will work but the timing would be wayyyyy off, it could work if you cut off all the tab and rwld them back on in diff spot, just easier to get a obd1 dizzy, stock crx will fit but you can only put 1 bolt on and it will not advance enough but will run
Thread
Thread Starter
Forum
Replies
Last Post
onefastek9
Honda CRX / EF Civic (1988 - 1991)
8
09-15-2008 05:41 PM
jtroy917
Honda CRX / EF Civic (1988 - 1991)
7
06-03-2007 02:54 PM
hatchboy
Honda CRX / EF Civic (1988 - 1991)
13
02-06-2007 07:04 PM
crexer
Honda CRX / EF Civic (1988 - 1991)
21
12-11-2005 10:52 PM
