my friends 91 ef b20 gsr head wont fit have mount kit NEED HELP
#1
New User
Thread Starter
Join Date: Oct 2001
Location: Auburn, WA, US
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
my friends 91 ef b20 gsr head wont fit have mount kit NEED HELP
My friend has a b20-vtec and it wont fit in his 91 ef he has the mount kit but throttel bodey hits the fire wall and driver side mount wont line up right if you need more detalils to help just say so, kinda a liame post but need help have no clue wtf is up with it!
#2
Join Date: Feb 2005
Location: From the East side, and loving the West side, UnitedStates
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Re: my friends 91 ef b20 gsr head wont fit have mount kit NEED HELP (RunningWithCows)
you have the right mount kit for? if so has the car been wrecked?
#3
New User
Thread Starter
Join Date: Oct 2001
Location: Auburn, WA, US
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: my friends 91 ef b20 gsr head wont fit have mount kit NEED HELP (RunningWithCows)
he has the efb1 mount kit which is for a 1988 to 1991 civic/crx, b- series mounts
#5
Re: (cr-x-91)
lol, he is not running a b20 intake mani in his B20VTEC
also is the head a pr3 or p72?
p72 is gonna get really close to the firewall but it should not hit it. I had about .5 to 1" with my p72head, with a aftermarket mani it'll make it much better, (ive now got a blox in there)
this is with hasport's cable tranny b swap
I also wonder if u have proper kit + if car has taken serious damage in some sort of collision
also is the head a pr3 or p72?
p72 is gonna get really close to the firewall but it should not hit it. I had about .5 to 1" with my p72head, with a aftermarket mani it'll make it much better, (ive now got a blox in there)
this is with hasport's cable tranny b swap
I also wonder if u have proper kit + if car has taken serious damage in some sort of collision
#6
New User
Thread Starter
Join Date: Oct 2001
Location: Auburn, WA, US
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Ef-er)
wekk the car has a salvaged title but its not damaged in the front at all i think we pretty much figured it out we needed a 90-93 diver side mount, the one off the motor so were gonna try to get it in and what clutch should i use?
#7
Junior Member
Join Date: Jan 2007
Location: 831 Salinas, Ca, monterey
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
you need 90-93 driver side bracket mount and rear bracket tranny mount you need the efb-1 kit from hasport for cable tranny's and as far as the clutch you need a 94-2000 integra clutch hydro... will work fine with cable tranny's too.. because of a 90-93 integra will not fit the tranny teeth...
Thread
Thread Starter
Forum
Replies
Last Post