looking for the right sized socket for my axle nuts
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: southwest suburbs, IL., USA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
looking for the right sized socket for my axle nuts
does anyone know what size the axle nuts are on a 91 hatch dx? I need to pick one up and i dont know what size they are
#3
Honda-Tech Member
Join Date: Apr 2002
Location: Baltimore, Md, USA
Posts: 3,196
Likes: 0
Received 0 Likes
on
0 Posts
Re: looking for the right sized socket for my axle nuts (MAD SCIENTIST)
Yeah it's 32. Stick the socket on a breaker bar with extension, make sure you popped out that notch on the nut, have someone stand on the brakes and just put your weight into it, it should come right off.
#4
Re: looking for the right sized socket for my axle nuts (FourthGenHatch)
or get yourself a black and decker bulldog electric impact gun its better than my matco air gun
#5
Re: looking for the right sized socket for my axle nuts (4ghatch)
Also, when you go to remove them, they have a crimp in the center of the bolt. You will need to pop this out. Just use a flathead screwdriver and a hammer to tap it.
#6
Honda-Tech Member
Re: looking for the right sized socket for my axle nuts (4ghatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4ghatch »</TD></TR><TR><TD CLASS="quote">does anyone know what size the axle nuts are on a 91 hatch dx? I need to pick one up and i dont know what size they are</TD></TR></TABLE>
Well I hope that they are the original axle nuts or atleast size that is. Limozeen ran into a problem where the aftermarket axle nuts were like a 30 or 31? Dont remember the size exactly but it wasnt OEM.
Well I hope that they are the original axle nuts or atleast size that is. Limozeen ran into a problem where the aftermarket axle nuts were like a 30 or 31? Dont remember the size exactly but it wasnt OEM.
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2002
Location: hittin corners so hard you can taste my rims..
Posts: 5,415
Likes: 0
Received 0 Likes
on
0 Posts
Re: looking for the right sized socket for my axle nuts (durrett syndrome)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by durrett syndrome »</TD></TR><TR><TD CLASS="quote">or a 1 1/4 socket</TD></TR></TABLE>
yulp
and like vince said.. could be a smaller nut.. see what they do when the treads get fucked.. they cut them down, then cut new threads.. thats loss of meat.. then they use a smaller nut.. sorta wack, but thats what they do for rebuilds. technicaly "it will hold"
for the most part, its 1 1/4, or 32 MM
yulp
and like vince said.. could be a smaller nut.. see what they do when the treads get fucked.. they cut them down, then cut new threads.. thats loss of meat.. then they use a smaller nut.. sorta wack, but thats what they do for rebuilds. technicaly "it will hold"
for the most part, its 1 1/4, or 32 MM
Thread
Thread Starter
Forum
Replies
Last Post