cor4ey

So i have almost everything to install jdm crx automatic windows but im curious on the original jdm wiring harness i have the main plug to the buttons on the door the plug to the power window motor and 2 lil plugs further down and also 1 plug just past the window button part? so what are these plugs for and what wires do i really need to give power and ground for this shizzle to work anyone? or show me a picture with definitions of each wire? help me out

cor4ey

or if anyone can point me in the direction to find the jdm automatic window wiring diagram so i know which wires at the end of the harness to hook up?

~sp33~

On the passengers door (the US drivers side) theres the plug for the central locking unit, the power mirrors, the power locks and the window switch.

cor4ey

ok well that still doesnt tell me which wires i need to give power and ground off the wiring harness

teckzro

hey i was looking to install some too and found this hopefully it helps ya!!!.

http://www.maxrev.de/files/2010/01/_...q_mirrors_.pdf

crx_si-r

might help if you post some pics.

and you are so lucky im in the process of re-doing my accessory harnesses into 1
power windows and heated power folding mirrors are all being re-done to look even cleaner than before. so lmk exactly what kind of help you need. and post some pics. i was a little confused by your first post.