ok i dont have a manual, yes im ghetto and really should go out and get one, now i have a gasket for the IACV with the metal mesh filter on it, and this is for my b16a intake manifold, now do i have to take off the t-body to get to this, should i also get a t-body gasket, if not what do i use to get the screws out, are they torx, or allen, i cant really see...
__________________ "Thoughtcrime does not entail death: thoughtcrime is death."
That is your IAC, all thats holding it in is 12mm bolts, it will have 2 coolant lines attached to it, 1 coming from the throttle body and one going to under the intake manifold. You should be able to just take the bolts out, replace the gasket while its still in the car, and then reinstall it.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.