alexdog69

does anyone know a source for the "HF" sticker?

the typical OEM parts online suppliers don't seem to carry them...just the "Si" one.

mitsubishiv5

its discontinued man, ive tried for months when i had my crx. only way to find them now is off parts cars, i was able to get a few.

i thought it was too good to be true when i ordered it online, then a week later i got an email saying NLA

Im able to source a rear triangle garnish with the hf emblem on it but it wont be cheap. itll be some good cash for something thats discontinued. Try the crxcommunity.com but those guys are ***s

also the dealership still cold the rear trinagle garnishes, 30 for passenger side, and 45 for drivers, if the emblem is available it will be included on the garnish.

mitsubishiv5

detuned

there's a mint CRX running around town here with that decal. I wanted to snag it but i haven't seen it since.

alexdog69

anyone care to take a really nice pic, head-on... and provide some measurements?

in the hope that a vector file can be created such that reproductions can be made...

mitsubishiv5

i got it at home!!! first thing i did was trace the outline! :D smart huh. let me find it

DoubleEx

go to ef-honda.com get a hold of SIR-Rocket and he can get almost anything made.

JOE BD-0

In my neighborhood, it's chick chick, kaboom! THEN you ask "who's there?"....Be careful when "thief'n"....good luck

dacrxguy

going across the sticker is 7.5cm from top to bottom it is 2cm

it is 1cm away from the left corner

around 4cm from the right

1cm from the bottom and 13cm from the h to the top

lukily i got mine for 10 dollars both sides

RUCHO01

I need one of this too!!

mitsubishiv5

i got one for sale now


i wouldnt get a replica made unless it looks like the real thing, if you look at it closely it has a small border and the material is ultra thin, yet it doesnt tear. youll spend the same amount of money designing it and getting it printed, and it will still be fake

Tesla220

If someone gets these made up I'd be willing to buy one

Volkspeed

I have the vector file somewhere, traced it by hand. I used to make this, the Si and the shocker decals alot. Used 7 year cast vinyl and they still look as good as the day they got cut, which was about 2 years ago.

sikefcrx89

iTrader: (1)

no exact measurement of the sticker? Looks like that just gives location measurements

scottmog

just go to a sticker shop and print on up...

97SS

Just go to the junkyards, I've seen more than a few there.

ALLxMOTOR EG

Search around you might just get lucky.

dacrxguy

going across the sticker is 7.5cm from top to bottom it is 2cm learn to read fails church, VA, guy

sikefcrx89

iTrader: (1)

I read inches not Centimeters(already converted). Also that's just a pretty vague measurement. I was really hoping to get a detailed measurements,like actual numbers of spacing,how the big the bars are etc,etc, To make a replica of the sticker not just a general copy.Any idiot with a piece of vinyl and an exacto knife can make a bland copy.