Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
#1
Honda-Tech Member
Thread Starter
Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Like the title states, I'm looking to run a -8 an fuel feed line on my 90 civic hatch. I've seen the fitting that go from m12 by 1.25 banjo bolt to -6 an, and I could get a -6 an to -8 an adapter. But I'd rather not have that restriction there. I could drill and tap the fuel pump hanger to say m14, but I can not find the correct fitting for -8 an.
So I'm wondering if anybody here on Honda-tech.com has done this before.
So I'm wondering if anybody here on Honda-tech.com has done this before.
#2
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
The hole point of AN line is it's more efficient than banjo fittings. So it seems noot worth it in your case,
#3
Honda-Tech Member
Thread Starter
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Yes I know. I'm looking for any ideas on how someone has ran -8 an from the stock fuel pump hanger.
#4
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Look on jegs,
They have adapters and everything you need for the conversion.
I don't think you'll have issues
They have adapters and everything you need for the conversion.
I don't think you'll have issues
#5
Honda-Tech Member
Thread Starter
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Sorry I should have said this in the post. I'm looking for ideas and perhaps pictures of ways to run -8 line with the stock fuel tank and stock fuel pump hanger.
#6
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
For reference u can look at the kit shown on go autoworks. Ment for a civic but still like 6an and a fitting. Ezpz
#7
Honda-Tech Member
Join Date: Jun 2006
Location: Woodstock, ga, usa
Posts: 665
Likes: 0
Received 0 Likes
on
0 Posts
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Here you go.
Done by Chase before he was chasebays.
https://honda-tech.com/honda-crx-ef-...hoses-1527379/
Done by Chase before he was chasebays.
https://honda-tech.com/honda-crx-ef-...hoses-1527379/
Trending Topics
#8
Honda-Tech Member
Thread Starter
Re: Has anyone ran -8 an feed line in there ef from the stock fuel pump hanger
Here you go.
Done by Chase before he was chasebays.
https://honda-tech.com/honda-crx-ef-...hoses-1527379/
Done by Chase before he was chasebays.
https://honda-tech.com/honda-crx-ef-...hoses-1527379/
Thread
Thread Starter
Forum
Replies
Last Post
danedoremus
Welding / Fabrication
21
11-07-2011 11:58 AM
MarkosMotorsports
Road Racing / Autocross & Time Attack
4
05-24-2004 06:58 PM