Notices

failed emissions in az, NOX a bit high

Thread Tools
 
Search this Thread
 
Old 10-22-2005, 05:20 PM
  #1  
Thread Starter
 
alky350's Avatar
 
Join Date: Apr 2003
Location: Phoenix, AZ, US OF A
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default failed emissions in az, NOX a bit high

Need help with lowering my NOX, i failed for the second time.

my setup, 1990 dx with d15b swap, running obd1 (p08 ecu)

ran seafoam, tried octane booster and alcohol from home depot. dont know if the NEW 2 1/4 exhaust with new magnaflow cat has anything to do with it. using megan headers too.

before running seafoam, octane booster and alcohol


hc 0.39
co 7.79
nox 2.71

results after using seafoam and running with octane booster and alcohol

hc 0.32
co 2.69
nox 2.92

Applicable standard
hc 1.00
co 12.00
nox 2.50


Please HELP!
Old 10-22-2005, 08:39 PM
  #2  
 
westspeed's Avatar
 
Join Date: Aug 2004
Location: ROSEMOUNT, mn, usa
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (alky350)

u dont want nox it is from ur engine running too hot so higher octanes would only worsen this, all i could think of is find some thing to find ur engine to run colder
Old 10-23-2005, 07:35 AM
  #3  
 
tolnep's Avatar
 
Join Date: May 2004
Location: atlanta, ga, usa
Posts: 167
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (alky350)

try retarding the timing.. say 5 degrees . i have a crx hf. i bumpt the timging a bit above normal. failed smog. i had done all the things you described plus new plugs, wires, distrib cap and roter, fuel and air filter, changed oil and filter, sea foam in fuel, sea foam sucked in thru vacuum. i was working on getting mpg up. took it to inspection, failed NOX. was suprised. went home, set timing at specs, went back and passed, results were the best in 4 of 5 years minimum (i keep the old inspection slips)s
Old 10-23-2005, 10:47 AM
  #4  
Member
 
IGotNoSwap's Avatar
 
Join Date: Sep 2005
Location: Let me warn ya. Northern California
Posts: 1,063
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (tolnep)

lower octane would help as well. what did you put in before?
Old 10-23-2005, 11:41 AM
  #5  
Thread Starter
 
alky350's Avatar
 
Join Date: Apr 2003
Location: Phoenix, AZ, US OF A
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (IGotNoSwap)

87 octane on the 1st try....
Old 10-24-2005, 04:52 PM
  #6  
Thread Starter
 
alky350's Avatar
 
Join Date: Apr 2003
Location: Phoenix, AZ, US OF A
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (alky350)

bump
Old 10-24-2005, 06:40 PM
  #7  
 
westspeed's Avatar
 
Join Date: Aug 2004
Location: ROSEMOUNT, mn, usa
Posts: 172
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (alky350)

make ur car run as lean as it can.
Old 11-05-2005, 11:59 AM
  #8  
Thread Starter
 
alky350's Avatar
 
Join Date: Apr 2003
Location: Phoenix, AZ, US OF A
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
Default Re: failed emissions in az, NOX a bit high (westspeed)

PASSED, retarded time, replaced 02 sensor, cheap at autozone for 20 bucks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alky350
Honda Civic / Del Sol (1992 - 2000)
4
10-24-2005 06:59 PM
RedRocketCRX
Tech / Misc
1
06-22-2004 05:51 AM
GSRacer1
Tech / Misc
9
10-01-2003 01:23 PM
matt j
Honda CRX / EF Civic (1988 - 1991)
20
06-10-2003 09:39 AM
[626]95-GSR
Honda CRX / EF Civic (1988 - 1991)
2
08-14-2002 09:12 PM



Quick Reply: failed emissions in az, NOX a bit high



All times are GMT -8. The time now is 01:56 PM.