ef with b18b help
05-20-2012, 09:46 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
ef with b18b help
so as I was removing the crank pulley and the bolt snapped is there a way to remove it or do I need to pull the crank off and take it to the machine shop
05-20-2012, 04:35 PM
#3
Honda-Tech Member
Join Date: Mar 2012
Location: Fishkill, NY
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
05-20-2012, 08:53 PM
#9
DO IT ON ALL FOURS
Re: ef with b18b help
This isn't the GDD forum; go back to hole where you came from or at least add some tech with your banter.
Unless you have the tools (oxy/gas torch, drill bits/extractors, ect) I would just take it to a machine shop. A crankshaft snout is NOT something you want to be playing with.
Unless you have the tools (oxy/gas torch, drill bits/extractors, ect) I would just take it to a machine shop. A crankshaft snout is NOT something you want to be playing with.
05-20-2012, 09:37 PM
#10
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Re: ef with b18b help
This isn't the GDD forum; go back to hole where you came from or at least add some tech with your banter.
Unless you have the tools (oxy/gas torch, drill bits/extractors, ect) I would just take it to a machine shop. A crankshaft snout is NOT something you want to be playing with.
Unless you have the tools (oxy/gas torch, drill bits/extractors, ect) I would just take it to a machine shop. A crankshaft snout is NOT something you want to be playing with.
Thread
Thread Starter
Forum
Replies
Last Post