D series pistons in ZC??
#2
Re: D series pistons in ZC?? (JDM_ZC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_ZC »</TD></TR><TR><TD CLASS="quote">its hard to find parts for my aftermarket parts for my ZC...will D series Pistons fit into my ZC??</TD></TR></TABLE>
could you be a bit more clear in your question?
could you be a bit more clear in your question?
#3
Re: D series pistons in ZC?? (JDM_ZC)
Are you talking about putting SOHC d16a6 pistons into a DOHC d16a1? Is so, they will fit, but your compression will be low and they might need to be milled a tiny bit because they are a little taller.
#4
Thread Starter
Join Date: Feb 2006
Location: Philadelphia, PA, USA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: D series pistons in ZC?? (Steve91)
yes I am talking about puttin any D series performance pistons into a DOHC ZC...unless anyone knows where I can find parts specifically for the ZC...
#7
Honda-Tech Member
Join Date: Jul 2005
Location: Oklahoma, Oklahoma, Usa
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Go n 4 10s)
any Dseries pistons will fit in any dseries, the DOHC ZC has the biggest dome i know about so your gona loose compression unless you find some nice dome Aftermarkets, or if your wanting to boost find some low compression wiesco's or whatever
all dseries are 75mm bore
all dseries are 75mm bore
Trending Topics
#9
Thread Starter
Join Date: Feb 2006
Location: Philadelphia, PA, USA
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tippyman)
if its in the FAQ i'm sry I didn't read there lol....the ZC pistons are good but I cant find any aftermarket ones so I was gonna find some aftermarket D-series pistons to put in my ZC....thanks for the help tho
#10
Honda-Tech Member
Re: (JDM_ZC)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_ZC »</TD></TR><TR><TD CLASS="quote">if its in the FAQ i'm sry I didn't read there lol....the ZC pistons are good but I cant find any aftermarket ones so I was gonna find some aftermarket D-series pistons to put in my ZC....thanks for the help tho </TD></TR></TABLE> yes if your lookin for after market pistons use d-series pistons they will fit (as long as there the same bore as your cylinders). look around for the compression calculator (i think it's in the faqs) and enter the info to see which pistons will work for you/your set-up
Thread
Thread Starter
Forum
Replies
Last Post
solerizr
Honda Civic / Del Sol (1992 - 2000)
9
01-03-2007 04:41 PM