CRX (EE8) EDM VT 1.6L Axles?
#1
Member
Thread Starter
Join Date: May 2004
Location: SHAPE, Belgium, Im really American
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
CRX (EE8) EDM VT 1.6L Axles?
Anyone know if there is a direct replacement axle (usdm) that would work with the EE8 EDM Crx?
I was reading about the different axles needed for the conversions/swaps using the integra axles, etc.. but since mine is stock with the 1.6 im not sure what really would work.
Id rather order something from the states, as its much cheaper than buying locally. Any help would be appreciated
TIA
~Keebs
I was reading about the different axles needed for the conversions/swaps using the integra axles, etc.. but since mine is stock with the 1.6 im not sure what really would work.
Id rather order something from the states, as its much cheaper than buying locally. Any help would be appreciated
TIA
~Keebs
#3
Member
Thread Starter
Join Date: May 2004
Location: SHAPE, Belgium, Im really American
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Re: CRX (bfuller)
Well i read that some people had to change the hub ends or something in order for the integra axles to work.
Just trying to get clarification.
Just trying to get clarification.
#4
Honda-Tech Member
Nope, the B-series swap axles work fine.
On the other hand, you probably don't even need axles.
The boots are about €15 a piece here in europe, and the joints between €70-80.
Usually the outer joints go bad. I've rarely seen an inner joint go bust. Unless you have 300horses or something, you'll be fine replacing just the CV joints.
On the other hand, you probably don't even need axles.
The boots are about €15 a piece here in europe, and the joints between €70-80.
Usually the outer joints go bad. I've rarely seen an inner joint go bust. Unless you have 300horses or something, you'll be fine replacing just the CV joints.
#5
Member
Thread Starter
Join Date: May 2004
Location: SHAPE, Belgium, Im really American
Posts: 1,302
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SETI20)
Yea, i replied to your pm
Figure i can get some part numbers maybe and just do it myself then. Guess if i can do an ls 5th swap, i can do some greasy cv's :D
Figure i can get some part numbers maybe and just do it myself then. Guess if i can do an ls 5th swap, i can do some greasy cv's :D
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
JDMotive
Hybrid / Engine Swaps
4
08-04-2004 08:54 AM