b16 axle question
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: the dirty south, USA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
b16 axle question
i tried searching for my answers but couldn't find it...
i have a 91 crx si w/92 jdm b16 with ys1 tranny..well the driver side boot is ripped and was going to replace it. the original owner got the axles from raxles.com
i go to their website and they have 2 diff axles posted...
88 - 91 Honda, Civic CRX B Series Swap
Part Number : RAXBGEN4 $319.90
88 - 91 Honda, Civic CRX
B Series Swap B-Series with Y1 or SH3 Intermediate shaft.
Part Number : RAXBGEN4Y1 $319.90
the problem is i dont know what axles to use or what the difference is?.i got a book from the guy i bought it from and he wrote intermediate shaft from 95 gsr from raxles. i really dont know what that means.can any body shed some light on the situation?
and my second question is can i just replace the outer shaft/boot or do i have to replace the whole axle. i really dont want to spend $320 on them but i cant complain bc they are good axles and last a while( 2 years strong with torn boot have had the car for over 5 years)
this boot here
so if anybody can help me out it would be very useful.
i have a 91 crx si w/92 jdm b16 with ys1 tranny..well the driver side boot is ripped and was going to replace it. the original owner got the axles from raxles.com
i go to their website and they have 2 diff axles posted...
88 - 91 Honda, Civic CRX B Series Swap
Part Number : RAXBGEN4 $319.90
88 - 91 Honda, Civic CRX
B Series Swap B-Series with Y1 or SH3 Intermediate shaft.
Part Number : RAXBGEN4Y1 $319.90
the problem is i dont know what axles to use or what the difference is?.i got a book from the guy i bought it from and he wrote intermediate shaft from 95 gsr from raxles. i really dont know what that means.can any body shed some light on the situation?
and my second question is can i just replace the outer shaft/boot or do i have to replace the whole axle. i really dont want to spend $320 on them but i cant complain bc they are good axles and last a while( 2 years strong with torn boot have had the car for over 5 years)
this boot here
so if anybody can help me out it would be very useful.
#2
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: the dirty south, USA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 axle question
bump
i am going to be buying some tomorrow and is still wondering which one should i use.
the book that the original guy gave me with the car (5 years ago) said it needed the 95 gsr intermediate shaft. can anybody help me out?
i am going to be buying some tomorrow and is still wondering which one should i use.
the book that the original guy gave me with the car (5 years ago) said it needed the 95 gsr intermediate shaft. can anybody help me out?
#3
TRIAL USER
Join Date: Nov 2005
Location: Pueblo, CO, USA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 axle question
What the previous owner likely meant by 95 intermediate shaft, is that that's what is installed on your setup. If this is the case you will need an axle for the intermediate shaft you have, and not necessarily the car. Your best bet would be to check which shaft you have and report back...
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: the dirty south, USA
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 axle question
i understand that but on raxles web site they have Y1 or SH3 Intermediate shaft.
i just dont know what the gsr is...is it the y1 or sh3? thats the biggest problem i have...
i just dont know what the gsr is...is it the y1 or sh3? thats the biggest problem i have...
#6
#7
Re: b16 axle question
DA axles do not work which is the SK7 tranny..tried it for two day
SH3 tranny is for jdm 1st and 2nd gen tranny
someone correct me if i am wrong but i am still having prob with my car
Thread
Thread Starter
Forum
Replies
Last Post
RACING INTEGRATION
Honda CRX / EF Civic (1988 - 1991)
1
03-03-2006 08:09 PM