pmrhonda

Hey guys. I am running a CRX w/ a B16 swap. I really want a spoon n1 b/c of it's "clean" sound. Here are my questions: 1. What kind of catbacks are you guys running? 2. Would it be possible to "make" a spoon n1 silencer fit on a CRX, even though it's not available for this car? I am mainly looking for an exhaust that has a "smooth" sound to it, doesn't attract too much attention and is not raspy. I still want ppl to hear VTEC though. (Can't help it) Thanks very much.--Matt

abnaasefmb

"smooth" like berry white?

"Pysa"

Now thats SMOOOOOOOOOOOOOTH!

abnaasefmb

Problem is, you’ll never fit berry white under a crx

Ass$nyper

Honestly, the Spoon is a HORRID noise.
I'm running a custom fabbed setup, 2.5" mandrel bent piping a glass pack as a res and a 5 zigen muffler. It's quite loud but refined and with the cams in it sounds like an air plane tehe.

If you'd like a smooth exhaust greddys is awesome for that, same with the WS from APEXI. If you are looking for n1 style and quiet/refined you need to get your head checked

hondacivic90zc

i am running stock piping and a glasspack as a muffler. It is not too loud when crusuing at about 70 but you can hear it when you rev the motor. I must admit i hate the ricer sound because i am into V8's more but i must say when i bought mine (the exhaust was already on) it sounded good, deep for a four cylinder and nice and smooth. (not quite as smooth as berry white though )

Of topic my friend has a custom 2.5" system on his 93 teg with a B16A and a magnaflow muffler and i must say it sounds damn good Nice and deep and smooth like mine. And you can hear the vtec engagement on his sometimes and his motor is stock

hai_tech

i run invidia n1 sound really deep n nice

CR91X

they (greddy) don't make the SP 2 anymore do they? Apexi seen a couple nice one looks stock too! Sound should be nice, friend of mine had a greddy on his accord sounds good but a bit loud for me...maybe because he went with the biggest one they had?

VegaS10

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hai_tech &raquo;</TD></TR><TR><TD CLASS="quote">i run invidia n1 sound really deep n nice</TD></TR></TABLE>

X 2.

Tippyman

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Maxidermist &raquo;</TD></TR><TR><TD CLASS="quote"> same with the WS from APEXI.
</TD></TR></TABLE>



There's sound clips and vids in my project thread.

shocker

i really like my tanabe hyper medallion it sounds clean as hell

mr.speaker

we have this thread yet no one ever looks in it https://honda-tech.com/zerothread?id=1083089