2 screws my a**
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Cleveland, OHIO, USA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
2 screws my a**
ok im trying to take out my combo switch aka headlight switch everything i read says 2 screws even alldata . i got the 2 screws out but i can see two more holding it in and i cant get to them cause of the wheel is in my way.. need some help here guys i took off the little cover still cant get to the screws i dont wanna / dont know how to take off my whole wheel and i keep beeing the damn horn lol its pissing me off
#2
Honda-Tech Member
Re: 2 screws my a**
I had to do this switch earlier, and the wheel has to come off. Pop out the horn pad with a screwdriver and you'll see a nut that holds the steering wheel in.
#3
Honda-Tech Member
iTrader: (1)
Join Date: Jun 2008
Location: clarksville, tn, usa
Posts: 443
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2 screws my a**
haha bro you should just take your wheel off its very easy. just pop the little "H" emblem out of the center of the stearing wheel, you should be able to look inside the hole and see a nut. use a lug wrech to unscrew that nut and then pull the wheel off. from there you can take the whole blinker-headlight switch assembly off and do with it what you please. im sure if you have access to alldata you have look up how to take the steeering wheel off.
#5
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Cleveland, OHIO, USA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2 screws my a**
thanks alot guys! i got it sorry for being a little dumb when it came to taking off the wheel never knew it was so easy and alldata just said remove nut not that the h came off ... lol to me it looked like it didnt come off like that anyways thanks again
Thread
Thread Starter
Forum
Replies
Last Post