$Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAGED)
#76
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
89 civic hatchback 170k miles new pa inspection supposedly needs nothing, no way for me to really check over it good. seems pretty clean going to look at it tomorrow. asking $1900 i know not to pay $1900 what should i offer??
#77
Honda-Tech Member
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
through a big old 1500 at him if your scared or grab your ***** and say 1300 and you will get worked up to 1500 prolly then call her a day.
#78
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
I saw this ad for a used complete JRSC for D series with lots of extras
-fuel rail, fuel regulator, 450cc dsm fuel injectors
-AEM wide-band gauge with sensor very lightly used, will include a 3 gauge pillar and a jdm boost gauge
-WALBRO 255lph fuel pump brand new still in box
-FELPRO intake manifold gasket brand new in box
-rywire obd0-obd1 conversion for older d16 new dizzy all the cables and chipped p28 ecu
Price is 1300, what do you guys think?
My primary concern is with the reliability of the JRSC, will it last 50k + miles(used is this a gamble)?
Never thought about forced induction before but if the price is good I might go for it.
-fuel rail, fuel regulator, 450cc dsm fuel injectors
-AEM wide-band gauge with sensor very lightly used, will include a 3 gauge pillar and a jdm boost gauge
-WALBRO 255lph fuel pump brand new still in box
-FELPRO intake manifold gasket brand new in box
-rywire obd0-obd1 conversion for older d16 new dizzy all the cables and chipped p28 ecu
Price is 1300, what do you guys think?
My primary concern is with the reliability of the JRSC, will it last 50k + miles(used is this a gamble)?
Never thought about forced induction before but if the price is good I might go for it.
Last edited by crxisking; 02-28-2013 at 02:33 PM. Reason: Needed to add information
#79
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Just picked up a 1990 crx si last weekend with a ls swap and gsr tranny. It has tein springs, tokico blues, konig 15s, front/back upper strut braces, new nitto Neo gen tires, short shifter, header, and catback. Painted I think olive green drab? Flat paint with black hood, roof, and bottom 4 inches of body. 118,000 on body and 70,000 on motor. With only 1,000 miles on the swap. Is it worth the $2500 I paid for it? Interior is in great shape also.
#80
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Found this one..
http://cincinnati.craigslist.org/cto/3561006581.html
What do you think the actual value of this is? I'm looking for a daily driver hatch that gets good gas milage and can be slowly built up decently. I'm still debating between 88-91 or 92-up. I have at most 3k to spend and I need the car I get to be my daily driver. Any suggestions?
Most of my area (Ohio, specifically Dayton) is full of rice and rust so far.
http://cincinnati.craigslist.org/cto/3561006581.html
What do you think the actual value of this is? I'm looking for a daily driver hatch that gets good gas milage and can be slowly built up decently. I'm still debating between 88-91 or 92-up. I have at most 3k to spend and I need the car I get to be my daily driver. Any suggestions?
Most of my area (Ohio, specifically Dayton) is full of rice and rust so far.
#81
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Hey guys I need some advice. I'm looking for a new DD and came across an 89 crx on craigslist. Hes asking 2500, but i only have about 2k to offer. The description is this:
http://images.craigslist.org/3E23F43...2945a9144b.jpg
http://images.craigslist.org/3E13Gf3...b891ba166b.jpg
http://images.craigslist.org/3E23G53...beb3191faa.jpg
-B18A1 with New transmission
-Has a brand New stage 2 clutch
-AEM Cam Gears
-Unorthodox Pulley
-Gerret T3/T4 50 trim turbo
-DSM Turbo 360 Fuel Injectors
-Stainless Steel Braided Brake Lines
-Brand New Slotted rotors and Brake Pads
-New Upper Control Arms
-New Axle /seals and Axles
-Pushing close to 300 hp on reg gas
The Bad:
-only goes up to 3000 RPM's, Needs a new maf sensor (very easy fix)
-Speedometer cable is disconnected
-and the interior can use some TLC
-no radio
Very fast car, rdy for the track or street. She just needs some TLC.
I texted him and asked about the maf sensor, he said it needs a better one but he doesnt know which one to buy. It was a friend of the family who built it father and son in VA, and it was tuned by a performance shop there. Currently pushing 8psi. He said there are no vaccuum leaks in the turbo and compression is perfect.
Taking all this into account, Is this worth buying as my DD. Do you think it'll be an easy fix and alot of car for the money, or should i stay away? Thanks very much for the help.
http://images.craigslist.org/3E23F43...2945a9144b.jpg
http://images.craigslist.org/3E13Gf3...b891ba166b.jpg
http://images.craigslist.org/3E23G53...beb3191faa.jpg
-B18A1 with New transmission
-Has a brand New stage 2 clutch
-AEM Cam Gears
-Unorthodox Pulley
-Gerret T3/T4 50 trim turbo
-DSM Turbo 360 Fuel Injectors
-Stainless Steel Braided Brake Lines
-Brand New Slotted rotors and Brake Pads
-New Upper Control Arms
-New Axle /seals and Axles
-Pushing close to 300 hp on reg gas
The Bad:
-only goes up to 3000 RPM's, Needs a new maf sensor (very easy fix)
-Speedometer cable is disconnected
-and the interior can use some TLC
-no radio
Very fast car, rdy for the track or street. She just needs some TLC.
I texted him and asked about the maf sensor, he said it needs a better one but he doesnt know which one to buy. It was a friend of the family who built it father and son in VA, and it was tuned by a performance shop there. Currently pushing 8psi. He said there are no vaccuum leaks in the turbo and compression is perfect.
Taking all this into account, Is this worth buying as my DD. Do you think it'll be an easy fix and alot of car for the money, or should i stay away? Thanks very much for the help.
#82
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Hey guys I need some advice. I'm looking for a new DD and came across an 89 crx on craigslist. Hes asking 2500, but i only have about 2k to offer. The description is this:
http://images.craigslist.org/3E23F43...2945a9144b.jpg
http://images.craigslist.org/3E13Gf3...b891ba166b.jpg
http://images.craigslist.org/3E23G53...beb3191faa.jpg
-B18A1 with New transmission
-Has a brand New stage 2 clutch
-AEM Cam Gears
-Unorthodox Pulley
-Gerret T3/T4 50 trim turbo
-DSM Turbo 360 Fuel Injectors
-Stainless Steel Braided Brake Lines
-Brand New Slotted rotors and Brake Pads
-New Upper Control Arms
-New Axle /seals and Axles
-Pushing close to 300 hp on reg gas
The Bad:
-only goes up to 3000 RPM's, Needs a new maf sensor (very easy fix)
-Speedometer cable is disconnected
-and the interior can use some TLC
-no radio
Very fast car, rdy for the track or street. She just needs some TLC.
I texted him and asked about the maf sensor, he said it needs a better one but he doesnt know which one to buy. It was a friend of the family who built it father and son in VA, and it was tuned by a performance shop there. Currently pushing 8psi. He said there are no vaccuum leaks in the turbo and compression is perfect.
Taking all this into account, Is this worth buying as my DD. Do you think it'll be an easy fix and alot of car for the money, or should i stay away? Thanks very much for the help.
http://images.craigslist.org/3E23F43...2945a9144b.jpg
http://images.craigslist.org/3E13Gf3...b891ba166b.jpg
http://images.craigslist.org/3E23G53...beb3191faa.jpg
-B18A1 with New transmission
-Has a brand New stage 2 clutch
-AEM Cam Gears
-Unorthodox Pulley
-Gerret T3/T4 50 trim turbo
-DSM Turbo 360 Fuel Injectors
-Stainless Steel Braided Brake Lines
-Brand New Slotted rotors and Brake Pads
-New Upper Control Arms
-New Axle /seals and Axles
-Pushing close to 300 hp on reg gas
The Bad:
-only goes up to 3000 RPM's, Needs a new maf sensor (very easy fix)
-Speedometer cable is disconnected
-and the interior can use some TLC
-no radio
Very fast car, rdy for the track or street. She just needs some TLC.
I texted him and asked about the maf sensor, he said it needs a better one but he doesnt know which one to buy. It was a friend of the family who built it father and son in VA, and it was tuned by a performance shop there. Currently pushing 8psi. He said there are no vaccuum leaks in the turbo and compression is perfect.
Taking all this into account, Is this worth buying as my DD. Do you think it'll be an easy fix and alot of car for the money, or should i stay away? Thanks very much for the help.
#83
Honda-Tech Member
Join Date: Apr 2002
Location: The First State
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
What's up guys, it's been a while...I pulled this steering wheel out of a 90 or 91 hatch a couple years ago. I've never seen a leather wrapped OEM steering wheel so I had to grab it. I'd like to know what it's worth, its a shame about the top portion of it, but it looks worse in the picture than it really is.
#84
Keyboard Humorist
Join Date: May 2002
Location: Granada Hills, Ca, USA
Posts: 9,814
Likes: 0
Received 9 Likes
on
7 Posts
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
What are 90~91 Civic wagons selling for these days?
I can't seem to find enough for sale in my area (Los Angeles+ 50 miles surrounding) to get a good idea for what they are going for.
AWD would be ideal for what I'm planning to use it for.
2WD would be fine though.
I can't seem to find enough for sale in my area (Los Angeles+ 50 miles surrounding) to get a good idea for what they are going for.
AWD would be ideal for what I'm planning to use it for.
2WD would be fine though.
#85
B*a*n*n*e*d
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
What's up guys, it's been a while...I pulled this steering wheel out of a 90 or 91 hatch a couple years ago. I've never seen a leather wrapped OEM steering wheel so I had to grab it. I'd like to know what it's worth, its a shame about the top portion of it, but it looks worse in the picture than it really is.
#87
Honda-Tech Member
Join Date: Apr 2002
Location: The First State
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Yeah I can't say for sure that it is OEM, but the quality of the stitching looks more OEM than aftermarket to me. Even if the price isn't that high, I'd still be interested to know what it should go for. I may just end up throwing it on ebay.
#88
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
I can confirm that is not OEM JDM leather wheel. The real one, the spokes/thumb rests are wrapped as well, all the way up to the horn bezel.
#90
Honda-Tech Member
Join Date: Apr 2002
Location: The First State
Posts: 5,246
Likes: 0
Received 0 Likes
on
0 Posts
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
^ Thanks for the confirmation. I never thought or said it was JDM, I just said it was OEM.
#91
Hey CRX guys, can you tell me how much this is worth?
Found it in the shed today and need my exhaust to be finished. What could I get for this? just dirty from being in storage. no cracks or broken anything
#94
Re: Hey CRX guys, can you tell me how much this is worth?
Honestly all of that is dirt. I didnt wipe it down or anything. I could take armor all to it and it would be fine. Thanks for the info though guys! Im going to list it on my local forum for 25 picked up
#95
Honda-Tech Member
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
How much are Wagon Jail Bars going for? Found them in a Wagon at the junkyard today. They are in mint condition.
#96
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Hello,
I am looking at a rear disk brake conversion from a 99-00 civic to go into my EF B-swap hatch currently with rear drums. What is a reasonable price for getting the rear brake setup on this? My mechanic bought a front end damaged civic and I need to figure what is a reasonable amount.
Regards,
Loay
I am looking at a rear disk brake conversion from a 99-00 civic to go into my EF B-swap hatch currently with rear drums. What is a reasonable price for getting the rear brake setup on this? My mechanic bought a front end damaged civic and I need to figure what is a reasonable amount.
Regards,
Loay
#97
I'm looking to buy this OEM ef si sunroof visor it has slight cracks. its expected from the heat and stuff and it has a "Honda " logo stamped on it but no part number. any idea how I can tell if its OEM civic ef and what's its price range at. also same for a ef hatchback cargo cover . price range . thanks!
Posted from Honda-tech.com App for Android
Posted from Honda-tech.com App for Android
#98
Honda-Tech Member
Join Date: Apr 2013
Location: oklahoma
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
always buy honda
out of all the cars ive owned i have had the least amount of problems out of hondas
out of all the cars ive owned i have had the least amount of problems out of hondas
Last edited by Ash J. Williams; 04-29-2013 at 04:44 PM. Reason: no need for two posts
#99
Re: $Value Sticky$ What's It Worth? Should I Buy? What's the Cost? (COMMENTS ENCOURAG
Where would be the good place to buy the motor mounts and all four fuel injector for 89 civic Si? Again, my car is completely stock and just want a replacement that's all . No modifying!