windshield wipers won't work - blown fuse
#1
windshield wipers won't work - blown fuse
Hi. I tried to turn on my windshield wipers but they wouldn't work. I check the fused, it was burned out. Replaced it and I tried to turn the wipers on and it worked but I tried again and they won't work. So is it the motor or something else?
2000 Honda Civic.
2000 Honda Civic.
Trending Topics
#9
#10
Re: windshield wipers won't work - blown fuse
Does the fuse blow only when the wipers are turn on? If so, does the fuse blow when the wipers are set to low or high?
Do you have a multimeter?
Do you have a multimeter?
#11
Re: windshield wipers won't work - blown fuse
Hi again. I took my car to a car shop and they said it shorts out when I do the wipers for the wiper fluid. He got it working temporaily but he says he wants it for a full day. What does that mean? Could it be the motor or the wiring? I just want to know.
#12
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: windshield wipers won't work - blown fuse
What does that mean "he wants it for a full day"? You should have asked HIM that question. Did you ask him what he was going to be doing for the day he wants to keep it? How much is this going to cost you? All questions you should have asked him, not us.
#14
Re: windshield wipers won't work - blown fuse
I had same problem and found a short near the firewall where the wiper motors wires come through into the engine area. The wires are wrapped in plastic flex hose before and after the firewall. Through the firewall they aren't wrapped and one of the wires insulation was worn through with the copper wire exposed. This looks like a poor way to route cables - should be wrapped here as well. Hope this helps someone isolate their problem.
#15
Re: windshield wipers won't work - blown fuse
Thread
Thread Starter
Forum
Replies
Last Post
NACvicSi
Honda Civic / Del Sol (1992 - 2000)
1
08-27-2009 05:03 PM
Mishima
Honda Accord (1990 - 2002)
3
06-30-2009 09:08 PM