WANT TO PAINT JDM RISING SUN ON VALVE COVER
#5
Honda-Tech Member
Re: WANT TO PAINT JDM RISING SUN ON VALVE COVER
GO FIGURE IT OUT DUDE.
I would decide on the base-coat-background-color, and spray that out over a nice clean surface and a coat or two of primer.
Once it looks nice, mask out w/e it is you want to put on there, and spray it with a coat or two of a contrasting color. Remove masking, admire.
heat paint probably.
how hard can you make this?
I would decide on the base-coat-background-color, and spray that out over a nice clean surface and a coat or two of primer.
Once it looks nice, mask out w/e it is you want to put on there, and spray it with a coat or two of a contrasting color. Remove masking, admire.
heat paint probably.
how hard can you make this?
#6
Re: WANT TO PAINT JDM RISING SUN ON VALVE COVER
not hard at all ! i jus want to knoe how far do i seperate the stripes and i already polished the cover i want it to look glossy and yeah i cap alot not the point tho
Trending Topics
#8
Re: WANT TO PAINT JDM RISING SUN ON VALVE COVER
You can prep it about the same way as a paint job I am pretty sure I could be wrong. But from there just make a template and air brush it, or buy a a cut online and air brush it. Then just clear it, I don't know if regular clear will hold up to the heat I have never painted a valve cover, but I bet they make some arousal can clear for high heat. I hope this helps.
Thread
Thread Starter
Forum
Replies
Last Post
94IntegraLs04
Acura Integra
4
09-14-2004 09:28 PM