ehLAaay

Picking up some Rota Fighter 15x6.5's this week, just want to know what size tires i should wrap them with. My car is a daily driver for now but tires that have good/decent grip and cornering ability would be a plus.

Car is a '92 Civic CX Hatch with HX rims on, the tire size on those right now i believe are 185/50/14, but i'll have to double check.

I searched on Honda Tech and i found a post that said OEM 92 CX wheels are
175/70/13 - 5in wide

and i found another post

Stock for a CX

175/70/13
185/60/14
195/50/15

i'm guessing since i'm going to have 15's on that i should look for tires closest to 195/50/15?

Former User

Thread copied to the Wheel & Tire forum.

Libertariat

With a 15x7 wheels I know a lot of people run somewhere around 205/40 or 205/50. Your options vary a little as the width of the wheel offers you some flexibility with tire size. Definitely run a 205.

195/50R15 looks the best as far as profile sizing. 205/50R15 and 195/55R15 probably have better grip and might be closer to OE spec.

For tires, definitely get summer tires. Yokohama S. Drives get great reviews on tire rack, test well, and are the most bang for the buck summer tire out there. There are plenty of other solid options if you want to spend another $70+

milkwasabadidea

my personal preference would be 205 50 15...

eSiRll

will 205/50/15 also work well with a 15x7 wheel with a +40 offset?

Libertariat

Yes, that will be fine.

ChewToy

I run Nitto NeoGen 205/50/15s, $88 a piece in town.

Libertariat

That's not too bad. Discount tire direct sells them for $82 each with free shipping.

They're usually pretty hard to beat.

ehLAaay

sorry to bring this back up, didn't get the rims yet lol, quick question, the offset on HX rims is +45 i believe from what i searched on HT, if i get the fighters with the +40 offset will they fit right on?

vincam

+1

ehLAaay

but they won't be flush with the end of the fender right? i'd have to get some spacers?

Libertariat

Define flush.

My volks are +33, most oem honda wheels are either +40 or +45.

Low offset wheels are +10 or 0

+33 for example sticks out more than +45.

ehLAaay

sorry for the confusion, lol i have no idea what i'm talking about, let me re-phrase my last question, if i put on some 15x6.5 +40 with some 205/50 (or 40)/15's will they stick out past the fender or stay inside the fender

Libertariat

The tires?

You should be a lot more concerned with keeping the oem wheel/tire diameter and less of the way the car looks. If you want to change the wheel fitment appearance you should change the wheel or add spacers. Playing with your suspension geometry by using the wrong tire is a bad idea.

ehLAaay

that's the reason i'm asking, i don't want to pick up these rims if they won't work on my car because there's a possibility they'll rub against the fender or whatever, if they won't or don't fit i figure i'll just leave the HX's on or get a different set of Rota's with a different width and offset size

i'm just trying to get a better understanding, sorry if i'm being a pest