collkid

Do you see any difference with that Short Ram?

grumblemarc

iTrader: (4)

In power? No. In noise? Yes.

Ej8 d16

iTrader: (2)

Installed new hawk pads and rotors. Now for the rear drums.

Dan22

Put an Si clock in my VX. Lost one of the speedo bezel clips down the dash. Maybe it will shake out.

canadaek

Put a gsr duel bend shifter in it

ngarover

Replaced head gasket. Replaced all seals in head. now car will not start... sigh

98civdx

finally did my HID retrofit and discovered my water is likely leaking.

gxmrod

I went today to drive my car to school for the first time in a while, and BAM it didn't start!!!! So I jumped my starter and checked my spark plugs for spark, time to check my battery again...

lowdano

I installed an ASR subframe brace on my buddy's EM1. I installed some used ground control and koni coilovers on my hatch also.

Deetz

Changed the timing belt in my winter car, 2000 civic sedan...done, but what a PITA lol

Also, scored another Canadian EM1 cluster $80

conor97hx

I ordered my self a block works shift ****, radiator stay and billet oil cap. Also picking up front and rear tie bars up on friday. Also sounds silly but got my neons wired up.

All I need now is a egr valve and an alignment...only problem is it's hard to find a low car friendly alignment shop in my area.

kab00m

Chasing down more water leaks. This time it was the rear vents leaking through the perished foam gasket. I made my own and used clear silicone to help seal the vents. After doing this, I found another leak

94eg!

iTrader: (2)

Perfected driving position today with this inexpensive 2" black steering wheel extension...

killrroyale

Old radiator blew so it was time for a new one. 60mm tricore..... Nice and cool now. Oh yeah and my monster catch/overflow can.

4TheRide£j2

I'm currently getting my d15b7 head rebuilt @ the local machine shop can't wait to get it back so I can get started installing it..

d-cheeze

iTrader: (1)

Simple stuff today hid headlights and led turn signals ....also got some extened top hats in the mail today ... Going to install them sometime this week and hopefully get some ride quality back

GreatWave

iTrader: (5)

I got some more body work done on the rear quarters last night, and placed a big order today. new hood, new radiator, and aerocatch hood latches. hopefully everything will be here next week.

hondaking2000

I started to wire up my ex cluster in to a Canadian eh coupe but realized something was a miss with the
Wiring does anyone have a good reference guide to help me wire the cluster in as well as any tips.

hondaking2000

I just started my h22 swap into my ek pictures will follow soon.

Angel203

I have a eg8 a simple stock d15, I have it apart and I wanted to see if I could put a z6 head with the D15 block???

Angel203

Do a Z6 head go with a D15 block???

GreatWave

iTrader: (5)

it's possible, do a little bit of research in the faq's . it's called a mini me swap

d-cheeze

iTrader: (1)

Right on man ...That's gonna be my next move also ! Do you have a build up thread !

MisereNoire

Picked up some discounted 18 ga. T304 stainless sheet today...time to start fabricating some (nearly) rustproof fog light brackets!

GreatWave

iTrader: (5)

I got bored last night after I ran out of bondo, so I used up the last of my plastidip