swap finished... issue time
03-30-2010, 06:17 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
swap finished... issue time
well i finished my b16b swap into a 96 hatch...
first issue... tach isnt workin...
second issue.. obd2 comp wont scan
third issue.. ran outa beer...
who can help me solve
first issue... tach isnt workin...
second issue.. obd2 comp wont scan
third issue.. ran outa beer...
who can help me solve
03-30-2010, 07:37 AM
#2
Honda-Tech Member
Join Date: Oct 2009
Location: middletown ohio
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Re: swap finished... issue time
LOL Number 3 IS a serious issue! What distributor are you running obd1 or 2? There is a Blue wire on the left side of the engine bay right below the cowl. This blue wire is the tach test connector. When I did my swap (obd1) I had to run a wire from the distributor to that connector and splice it in.
03-30-2010, 08:04 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2010
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Re: swap finished... issue time
my guess would be its obd2 cause its a 97... but the werid thing is.. i went to change my dizzy cap and the ma ****er was bigger than an other dizzy cap out... who can figure that mother out
Thread
Thread Starter
Forum
Replies
Last Post
andoxviii
Honda Civic / Del Sol (1992 - 2000)
7
02-12-2010 04:11 PM
ozzyman
Tech / Misc
1
09-29-2003 01:39 AM
ozzyman
Hybrid / Engine Swaps
1
09-29-2003 01:39 AM