Skunk2 Manifold on Y8 (vid inside)
#51
Honda-Tech Member
Join Date: Mar 2005
Location: Edmonton, Alberta, Canada
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Manifold on Y8 (vid inside)
Another test you could do to test if the IACV is doing its job, or it's leaking, or something else is leaking...
Take off the IACV, and when looking at the two holes. The one farthest away from the TB, If you plug that one, Your motor should stumble and stall.. Unless your idle screw is fully turned out. If your Idle screw is all the way in, and your car still idles fine.. You MUST Have a Vacuum leak SOMEWHERE. Find it with brake cleaner or propane/butane or something.
EDIT: Errr, WAit, you said you had it fixed.. GJ!
Take off the IACV, and when looking at the two holes. The one farthest away from the TB, If you plug that one, Your motor should stumble and stall.. Unless your idle screw is fully turned out. If your Idle screw is all the way in, and your car still idles fine.. You MUST Have a Vacuum leak SOMEWHERE. Find it with brake cleaner or propane/butane or something.
EDIT: Errr, WAit, you said you had it fixed.. GJ!
#52
Honda-Tech Member
Join Date: Nov 2008
Location: rosamond/so cal
Posts: 889
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Manifold on Y8 (vid inside)
its ur idle air controle valve.. pull it out and take some carb cleaner and spray it out.. its a pretty easy fix.. good luck with it
#54
Re: Skunk2 Manifold on Y8 (vid inside)
my jdm d15b swap is doing the same thing i have two holes in my TB and the bottom hole when i plug it the car idles perffect is their any way some one could help me out with this as well THANKS
also my idle screw was mostly in when i did it thanks
also my idle screw was mostly in when i did it thanks
#57
Re: Skunk2 Manifold on Y8 (vid inside)
Ok so I have a y8 in my eg. Put in the skunk2 IM in and now it does the same thing?
It has coolant and all sensors and plugs are connected. TB is cleaned and gasket is good. Any idea?
It has coolant and all sensors and plugs are connected. TB is cleaned and gasket is good. Any idea?
#58
I never narc'd on nobody!
iTrader: (1)
Re: Skunk2 Manifold on Y8 (vid inside)
6 year old thread
The rules exist for a reason. Please read, follow, and respect them. Make your own thread.
https://honda-tech.com/honda-civic-d...sting-3002401/
The rules exist for a reason. Please read, follow, and respect them. Make your own thread.
https://honda-tech.com/honda-civic-d...sting-3002401/
#59
Re: Skunk2 Manifold on Y8 (vid inside)
Hey guys a need some help with my car!!!
idk wats goin on with it right now so maybe u guys can help
Thanks
http://www.youtube.com/watch?v=BeUCpgHlWJ4
idk wats goin on with it right now so maybe u guys can help
Thanks
http://www.youtube.com/watch?v=BeUCpgHlWJ4
Is there anyway you can post pictures or a video of where everything is plugged up at on your y8 into your manifold?
I'm having the same issue and no idea what it is. I have everything connected and cleaned everything that can be cleaned and all and still nothing. Thank you in advance
Thread
Thread Starter
Forum
Replies
Last Post
TH33G4MON3
Honda Civic / Del Sol (1992 - 2000)
18
11-23-2006 09:41 AM