single cam people
#1
single cam people
I have a y7 turbo, with a greddy td04. pretty clean with vitara pistons and a couple other upgrades. planning to take it to the track starting the new year. since im trying to put some miles on this fresh build before i tune it.
Ive been getting people ask me why i didnt go vtech with a y8 or a z6 or even a mini me swap. I did some reading and just stayed with the y7 because w the turbo its not going to be much of a difference. and that a mini me swap tends to leak. lemme know what you guys think.
Ive been getting people ask me why i didnt go vtech with a y8 or a z6 or even a mini me swap. I did some reading and just stayed with the y7 because w the turbo its not going to be much of a difference. and that a mini me swap tends to leak. lemme know what you guys think.
#3
Re: single cam people
yeah, head gasket. i had one before too and changed the dizzy with the harness and everything. but on this car now i just kept it non vtech and just changed the y7 manifold.
i guess my question would be, if two cars had the exact build but one had a mini me swap, would it make a difference if both were turbo?
i guess my question would be, if two cars had the exact build but one had a mini me swap, would it make a difference if both were turbo?
#4
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: single cam people
DO NOT RUN THIS WITHOUT A TUNE! I don't care what your rational is. If you want to break it in then do it on a dyno.
BTW, turbo likes VTEC. Yes there will be a difference. I'll put mine up against yours any day.
BTW, turbo likes VTEC. Yes there will be a difference. I'll put mine up against yours any day.
Trending Topics
#10
Re: single cam people
well it was tuned before the rebuild. but ok. i have a mini me on it but then picked up a y7 head, took it to the machine shop and kept the y8 manifold. i'll keep it like this for a while. if anything i'll change it back later.
#11
Honda-Tech Member
Re: single cam people
#14
Honda-Tech Member
Re: single cam people
you can acually port a non vtec head out more because there are no oil gallery's running near the ports. they do make more aftermarket cams for the vtec heads then non vtec. vtec on a single cam is not that much to run home to mom about. with a cam and a big port job to a non vtec head would be just as good as a cammed vtec head. ive seen stock for stock turbo builds of non vtec and vtec d series and they both make roughly the same power and it isnt much to gain just having a vtec head. all the non vtec head needs is a better aggressive cam. if the prior tune was on the vtec head and your breaking in the motor i would recommend keeping the motor with the same setup to break it in. do not run it hard unless u have a wide band and know ur tune is running ok.
#15
Re: single cam people
yeah it had the vtec head last time it was tuned.Now i put on the non vtec head and rebuilt the motor, but running the same tune. I just want to break it in before i tune it again and dont want to tune it untill I have money to get a turbo cam. so i can do it all at once to see how it feels.
#16
Honda-Tech Member
Re: single cam people
R u high on crack... the y7 intake manifold is for fuel efficiency its called a bottleneck for a reason...
here if you dont believe me tell me which one looks like it has more flow...
Y7
Y8
Than dont drive the car or disconnect the turbo from the intake and put a normal filter on it cause youre going to blow sh*t up
here if you dont believe me tell me which one looks like it has more flow...
Y7
Y8
yeah it had the vtec head last time it was tuned.Now i put on the non vtec head and rebuilt the motor, but running the same tune. I just want to break it in before i tune it again and dont want to tune it untill I have money to get a turbo cam. so i can do it all at once to see how it feels.
#17
#18
Honda-Tech Member
#20
Re: single cam people
#22
Honda-Tech Member
#25
Honda-Tech Member
Join Date: Oct 2004
Location: Lawton, OK
Posts: 579
Likes: 0
Received 0 Likes
on
0 Posts
Re: single cam people
the Z6 head flows almost the same exact numbers as the Y8 maybe just a touch more but the Y8 has a swirl-port design on the intake side to help with fuel/ air atomization.
Thread
Thread Starter
Forum
Replies
Last Post
hypeonline
Honda CRX / EF Civic (1988 - 1991)
3
08-19-2012 09:14 AM
ferdiepinoy
Honda Civic / Del Sol (1992 - 2000)
14
06-11-2010 05:03 PM
ek4ferrio
Honda Civic / Del Sol (1992 - 2000)
23
07-20-2006 11:04 AM