single cam boost help!
#1
single cam boost help!
I got a dx non-vtec d15b7 and i wana go on boost, and i heard that i could with stock internals and stuff and i would be fine if i tune around 5psi. whatelse do i need or what?
any help, comments, or suggestions???
any help, comments, or suggestions???
#2
Honda-Tech Member
Join Date: Dec 2008
Location: west lafayette, ohio
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
Re: single cam boost help!
I know it'll happen, so I'll just get it over with. Use the search button.
Get bigger injectors, slap the kit on there and get a good tune. Done.
Get bigger injectors, slap the kit on there and get a good tune. Done.
#3
Honda-Tech Member
Re: single cam boost help!
research! and check out the forced induction forum
someone else recently had a very similar question for there y7. lots of stuff i've already covered in there that will help you with your questions.
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/wanna-boost-my-d16y7-2727504/
someone else recently had a very similar question for there y7. lots of stuff i've already covered in there that will help you with your questions.
https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/wanna-boost-my-d16y7-2727504/
#5
Man U FTW
Re: single cam boost help!
1. Go to the Forced Induction forum
2. Read the FAQ
3. If you still have questions, search the forum a little
4. IF, after all that, you have questions (which you probably will) then ask
Some people in the Model Specific forums are a little iffy on their responses related to forced induction. That's not to say you won't get good help, but you may have to sort through a few bad responses to get your answer. Try FI...you'll get what you need
2. Read the FAQ
3. If you still have questions, search the forum a little
4. IF, after all that, you have questions (which you probably will) then ask
Some people in the Model Specific forums are a little iffy on their responses related to forced induction. That's not to say you won't get good help, but you may have to sort through a few bad responses to get your answer. Try FI...you'll get what you need
Thread
Thread Starter
Forum
Replies
Last Post