ABK

I tried searching but I could find anything (mainly because I don't know wtf it's called). How do you remove the roof trim (two black strips that run on top of the roof)? I got rust building up on the roof for some fucken reason and I need to take care of it.

95ProjectEJ1

iTrader: (5)

74306-SR8-A01 007 MOLDING ASSY., R. ROOF $28.40
74316-SR8-A01 009 MOLDING ASSY., L. ROOF $28.40

This is the p/n for a 92-95

ABK

I don't need to buy new ones, I need to remove them because I got some rust issues to take care of. Sorry if I wasn't completly clear.

mugenhatchie

Get a flathead and pry up around the middle. there are clips on the forward and rear parts of those strips. They should just pop off (someone correct me if I am wrong). Hope this helps..

spork motorsports

search headliner

MJ0LNIR

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spork motorsports &raquo;</TD></TR><TR><TD CLASS="quote">search headliner </TD></TR></TABLE>

Exterior, not interior.

To OP: here's a couple threads I found:

https://honda-tech.com/zerothread?id=1475877
https://honda-tech.com/zerothread?id=826916

That should get it done.

dad0c402

let me get you a pic from the service manual, it helped me out tons.

here it is, btw it's the roof molding, i'm pretty sure that's what you need. The roof trim is the piece on the inside in the back.

SoCal EJ1

Be careful though. Try to put the screwdriver as close to the clip as possible because the trim snaps in with a metal snap that runs the length of the trim. If you aren't careful you'll bend the trim and warp the metal.

ABK

thanks alot man

Eran

iTrader: (1)

When I get my car painted in a year or so, I'm having those trim pieces removed, and then the clip holes shaved. That way I still have rain gutters, but I don't have the stupid black trim that fades, cracks, and gets wax stuck on and under it.

SoCal EJ1

interesting idea but i think that's gonna be a deep groove and it's gonna look kinda funny.